Staffordshire · England
Bath re-enamelling & resurfacing in Burston, Staffordshire
Local bath re-enamelling for Burston: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- An old resurfacing that’s failing
- A coloured bath you want in white
How to look after the repair
It’s all simple stuff:
- Never use suction bath mats
- A dripping tap should be fixed promptly
- Have chips seen to early
- A quick wipe after use keeps limescale away
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
About our bath re-enamelling in Burston
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. Common call-outs are for a coating lifting around the plughole and brown or grey marks that don’t clean off, in acrylic baths, Victorian roll-tops and basins & shower trays.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Burston (ST18)
- Area hub
- Staffordshire
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Burston
Burston is about 3 miles south-east of Stone, in Staffordshire. Book a date that suits you, and we’ll give you an arrival time in advance, so there is no waiting around. Our repair technicians cover 512 places across Staffordshire, from the larger towns to small villages. We work right across the region, from Burston to Birmingham (about 29 miles away).
Our visits in ST18 are booked in the same way as anywhere else. Streets in the area include Shruggs Lane, Lichfield Road and Butterhill Bank, all of which we cover. We also travel to Sandon (1 mile south-east), Smallrice (1 mile north-east), Dayhills (2 miles north-east), Salt (2 miles south-east) and Sandonbank (2 miles south). Further out, we also cover Stafford (5 miles south), Newcastle-under-Lyme (12 miles north-west), Cannock (12 miles south), Longton (8 miles north), Rugeley (10 miles south-east) and Burntwood (15 miles south-east).
Landmarks near Burston
Typical jobs here are in homes near St Rufin's and the streets around them. For rail, the closest station is Stone station, roughly 3.7 miles north-west of the centre. A little further out are Stafford Hospital (4.2 miles south) and Chartley Castle (4.5 miles east). The countryside around Burston includes Doxey Marshes.
What bath re-enamelling costs
Resurfacing from £350. There is no charge for travel to Burston. The price depends on:
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- Access to the area
- How many areas need work
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from pictures
The better the pictures, the more accurate the price. Here’s what we find most useful:
- A clear, close picture of the problem area
- A wider photo showing the whole bath
- Any details about the material
- A coin or ruler next to the damage for scale
For a price in Burston, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
What happens on the day
We begin by going over the job with you. Next, we cover and mask everything nearby and we start. You can expect it to take a full day, and we’ll keep you posted as we go.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Tell us if there are stairs or a lift
- Keep a parking space free if you can
- Make sure the area is dry
Getting a price
Send us pictures of the damage and one of the whole item, and tell us you are in Burston, and we will reply with a fixed price.
Read more
What we can’t put right
We won’t take on work that won’t last, so these are the limits:
- Problems we can’t see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that’s cracked right through
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
Repair or replace in Burston?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before booking.
Why us?
- One price list for the whole UK
- Colour mixed on the day to match
- Work done at your home or business
- We leave the room as we found it
Take a look at our pricing and resurfacing vs replacement cost guide.
What else we do in Burston
Your questions about bath re-enamelling in Burston
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
How long does re-enamelling last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Is there a guarantee?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
Will the price change on the day?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
How do I book?
Use the quote form or ring 0345 017 0787.
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Landlord and trade work in Burston
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Do you need bath re-enamelling in Burston?
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
If you can see any of these, send us a picture:
- A coloured bath you want in white
- A coating lifting around the plughole
- A roll-top that is seen better days
- Staining under the taps and around the waste
Before you book anyone
- Who turns up on the day
- What happens if the damage is worse than the pictures show
- How soon you can use it again
- What protection goes down before work starts
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
