Lincolnshire · England

Bath Re-enamelling for Saracen's Head homes

Full bath re-enamelling and resurfacing for householders, landlords and businesses in Saracen's Head. Free, fixed quotes from your pictures.

  • Resurfacing from £350
  • A peeling or bubbling previous coating
  • A period or roll-top bath worth keeping
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Saracen's Head

Bath re-enamelling at your home in Saracen's Head

Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. If you’re dealing with a coloured bath you want in white and thin, worn enamel in places, we can typically put it right.

Big or small, you get the same one-year guarantee.

Surface Doctor technician refinishing the outside of a roll-top bath
Where
Saracen's Head (PE12)
County
Lincolnshire
Guarantee
One year on every repair
Price
From £350. Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026

How to look after the repair

Aftercare is simple, and it makes a real difference:

  • Do not let dyes or oils sit on the finish
  • Get any chip repaired quickly
  • Repair dripping taps early
  • Never use suction bath mats

Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.

Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.

What we do, step by step

Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes the best part of a day. If anything looks different from your photos, we’ll talk to you before going ahead.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure until the following day.

How to prepare

  • Have somewhere for us to park nearby if possible
  • Make sure the area is dry
  • Plan for the room to be out of bounds to pets and children

Getting a price

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Send pictures for a quote

Related advice

For landlords and businesses

Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

Where we work around Saracen's Head

Saracen's Head is about 7 miles north-east of Spalding, in Lincolnshire. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. We work in 732 places in Lincolnshire.

Our technicians cover all of PE12. From Washway Road, Roman Bank and Saltney Gate or a nearby road, we can come to you. Other places close to Saracen's Head include Holbeach Clough (1 mile east), Moulton Seas End (1 mile west), Holbeach Bank (1 mile east), Loosegate (2 miles south-west) and Holbeach (2 miles south-east). Larger places within reach include Boston (10 miles north), Spalding (7 miles south-west), Austerby (15 miles west), Pinchbeck (6 miles west), Witham (11 miles north) and Long Sutton (6 miles south-east).

Around Saracen's Head

Locally, our jobs take us to homes close to University Academy Holbeach and Holbeach Bank Primary Academy. A little further out are Fleet Motte (3.8 miles south-east).

Map of Saracen's Head © OpenStreetMap contributors

FAQs for Saracen's Head

Do you come to Saracen's Head?

We do. We send a technician to Saracen's Head for every job, with no extra charge for travel.

Is the work guaranteed?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

Is there a call-out fee?

There’s no separate call-out charge. The fixed quote covers the visit and the work.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.

How long will the bath be out of use?

Most baths are done in a day, ready the following day. We give you timings with the quote.

Will the price change on the day?

We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

Are you accredited?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

What does bath re-enamelling cost?

Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.

What your bath is made of matters

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Do you need bath re-enamelling in Saracen's Head?

Older baths often have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.

You may need us if you’ve spotted:

  • Enamel that’s lost its shine and feels rough
  • Chips and rust in more than one place
  • A period or roll-top bath worth keeping
  • A peeling or bubbling previous coating

Before you book anyone

  • What happens if the damage is worse than the pictures show
  • Whether they match the colour on site
  • How long the guarantee is and what it covers
  • If travel is included in the price

10 questions to ask before booking

Honest limits

A few problems are outside what a surface repair can do:

  • A bath split right through the body
  • Plumbing leaks, which need a plumber
  • Problems we can’t see until an old finish comes off

If in doubt, send photos and we’ll say what we think before you book.

Materials we work on in Saracen's Head

  • Basins & shower trays
  • Victorian roll-tops
  • Pressed steel baths
  • Acrylic baths
  • Cast iron baths

Repair or replace in Saracen's Head?

Replacing a bath normally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.

What you get with us

  • We come to you, anywhere in the UK
  • One-year guarantee on every repair
  • Dust sheets down, tidy finish
  • Free fixed quotes from pictures

Read our full price list and bath cost comparison.

DIY kit or professional repair?

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.