Kent · England
Bath Re-enamelling for Sarre homes
Problem with your bath in Sarre? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Several chips and rust patches
- A period or roll-top bath worth keeping
Bath re-enamelling in Sarre, done in place
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Common call-outs are for a period or roll-top bath worth keeping and worn patches where water runs and sits, on acrylic baths, pressed steel baths and Victorian roll-tops.
Big or small, you get the same one-year guarantee in Sarre and across Kent.
- Area
- Sarre (CT7)
- Region
- Kent
- Guarantee
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. There is no area surcharge for Sarre. The price reflects:
- Any earlier repairs that need removing first
- Whether we combine several jobs
- The material
- How many areas need work
A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with no extras added later.
Getting a price from pictures
Two or three clear photos are normally enough. It helps if you send:
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- What it’s made of, if you know
- A coin beside the damage so we can judge size
Email us a picture of the damage and a wider shot of the whole item, with your CT7 postcode, and we’ll reply with a fixed quote.
How to care for the repair
Nothing complicated is needed:
- Store bottles off the bath
- Wipe the bath dry after use in hard water areas
- Wash away dyes and oils after use
- Have chips seen to early
Wipe the bath dry after use where you can, and rinse off any bath products.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Your questions about bath re-enamelling in Sarre
Do you cover Sarre?
Yes. We work across the UK and come to Sarre. Send photos and we’ll quote, or call 0345 017 0787.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
Do the materials smell?
Expect a mild smell while we’re working, which fades afterwards.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is there a smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Can I add another job to the visit?
Of course, and it typically saves money. Just add the extra items to your pictures and you’ll get one combined price.
Why repair rather than replace?
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Prices start from £350. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- Free fixed quotes from pictures
- Every repair guaranteed for a year
- We leave the room as we found it
- Colours mixed by hand to suit your surface
Read our full price list and bath cost comparison.
About Sarre
Sarre is about 5 miles south-east of Herne Bay, in Kent. We agree a date that works for you, and we will give you an arrival time in advance, so there’s no waiting around. We work in all 922 towns and villages across Kent. Our jobs stretch from Sarre to London (about 58 miles away).
Our visits in CT7 work the same way as everywhere else we cover. You will find streets such as Island Road, Old Road and Chantry Park. We also cover the places around Sarre: St Nicholas at Wade (1 mile north-east), West Stourmouth (1 mile south), East Stourmouth (2 miles south), Monkton (2 miles east) and Upstreet (2 miles south-west). Larger places within reach include Canterbury (8 miles south-west), Margate (7 miles north-east), Dover (14 miles south), Ramsgate (7 miles east), Broadstairs (8 miles east) and Whitstable (9 miles west).
Near you in Sarre
In Sarre, that means homes near Church of Saint Nicholas, Kings Head Inn and Grove Ferry Picnic Area and the streets around them. The nearest railway station is Minster station, roughly 3.5 miles east of the centre. Well-known places in the area include Powell-Cotton Museum (3.8 miles north-east).
What a repair cannot fix
Not everything can be repaired, and we’ll tell you before we start. Repairs won’t solve:
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we’ll tell you honestly before booking.
What we work on
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
What else we do in Sarre
How the visit works
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a full day, and the room is left clean and tidy.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s usually ready the following day.
How to prepare
- Open a window if you can
- Plan for the room to be out of bounds to pets and children
- Mention any earlier repairs or resurfacing
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Advice
When to call us in Sarre
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
These are the problems we’re asked about most:
- Staining under the taps and around the waste
- A roll-top that is seen better days
- Wear marks under the taps
- Several chips and rust patches
What your quote should include
- Whether the colour is mixed to match
- How long it needs to cure
- The length of the guarantee and what it covers
- Is the price fixed, and does it include VAT?
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
