Kirklees · England
Bath re-enamelling & resurfacing in Scissett, Kirklees
Our technicians come to Scissett for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- A dull, rough surface that won’t come clean
Looking after it afterwards
So the finish stays in good condition for years:
- Wipe the bath dry after use in hard water areas
- Use washing-up liquid and a soft cloth
- A dripping tap should be fixed promptly
- Get any chip repaired quickly
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
About our bath re-enamelling in Scissett
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. If you are dealing with brown or grey marks that don’t clean off and several chips and rust patches, we can usually put it right.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Area
- Scissett (HD8)
- County
- Kirklees
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Where we work around Scissett
Scissett is about 6 miles south of Ossett, in Kirklees. Jobs in Scissett are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. We work in 189 places across Kirklees, from the larger towns to small villages. We work right across the region, from Scissett to Leeds (15 miles away).
We cover every part of the HD8 postcode area. Jobs here include addresses on Water Street, Saville Street and Wakefield Road and the roads around them. Neighbouring places we cover include Clayton West (1 mile north-east), Skelmanthorpe (1 mile west), Park Gate (1 mile north-west), Nether End (2 miles south) and Denby Dale (2 miles south-west). Larger places within reach include Huddersfield (8 miles north-west), Dewsbury (7 miles north), Batley (9 miles north), Mirfield (7 miles north-west), Liversedge (9 miles north) and Cleckheaton (10 miles north).
Near you in Scissett
Around Scissett, we work in homes near Shoulder of Mutton pub, Church of St Augustine and Scissett Church of England Academy and the streets around them. Scissett’s nearest station is Denby Dale station, roughly 2 miles south-west of the centre. Further afield, we also cover the area around Cumberworth Half (2.5 miles west) and Storthes Hall Hospital (4.5 miles west).
Your questions about bath re-enamelling in Scissett
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will do the rest.
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
How much does bath re-enamelling cost in Scissett?
Resurfacing from £350. Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your HD8 postcode.
What areas do you cover?
The whole UK, including all of Kirklees. Send your postcode with your photos and we’ll confirm dates.
Are there extra charges for Scissett?
No. Our quotes include travel, and we charge the same wherever you are.
Is it safe with children and pets around?
Just keep them out of the work area. We will tell you when the room can be used again.
Do you need bath re-enamelling in Scissett?
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Common reasons people in Scissett contact us are:
- Chips and rust in more than one place
- A peeling or bubbling previous coating
- Enamel that is lost its shine and feels rough
- Staining under the taps and around the waste
Comparing quotes
- Aftercare advice
- Whether the colour is mixed to match
- How long the guarantee is and what it covers
- When it can be used again
How it works
The work is clean and fairly quiet. Protection goes down first, then the work takes a full day. Before we leave, we explain how soon it can be used and how to care for it.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can usually be used the next day.
Before we arrive
- Mention any parking restrictions or tricky access
- Keep a parking space free if you can
- Tell us if there are stairs or a lift
Getting a price
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Advice
Landlord and trade work in Scissett
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
Prices and what affects them
Resurfacing from £350. You’ll know the full cost before booking. We look at:
- Doing more than one item at once
- The material and finish
- Previous DIY repairs that have to come out
- Access to the area
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
How to get a fixed price
We price nearly every job from photos. This is what to send:
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- Any details about the material
- One sharp close-up of the damage
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Also near Scissett
What else we do in Scissett
Repairing versus replacing in Scissett
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. In most other cases, resurfacing is the better choice. Prices start from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
What you get with us
- Colours mixed by hand to suit your surface
- Everything repaired in place
- Technicians who travel to you, UK-wide
- CHAS, Constructionline and SafeContractor accredited
See our full price list or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
