Norfolk · England
Bath re-enamelling & resurfacing in Sculthorpe, Norfolk
We travel to Sculthorpe for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Chips and rust in more than one place
Bath re-enamelling at your home in Sculthorpe
Resurfacing renews the whole surface of the bath without taking anything out. It’s the answer when the whole bath is tired rather than one spot. We work on acrylic baths, pressed steel baths and cast iron baths, and the jobs we see most are a coating lifting around the plughole and staining under the taps and around the waste.
You get a one-year guarantee, the same in Sculthorpe as everywhere else we work.
- Location
- Sculthorpe (NR21)
- Region
- Norfolk
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What we are called out for in Sculthorpe
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, generally first under the taps and around the waste.
Common reasons people in Sculthorpe contact us are:
- A roll-top that is seen better days
- A dull, rough surface that will not come clean
- Brown or grey marks that don’t clean off
- Worn patches where water runs and sits
What to look for in a quote
- How long the guarantee is and what it covers
- A fixed quote, and whether VAT is included
- What happens if they find more damage
- Aftercare advice
Towns and villages near Sculthorpe
What else we do in Sculthorpe
What we do, step by step
Here’s how a visit normally runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Plan for the best part of a day from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
How to prepare
- Make sure the room can be ventilated
- Mention any earlier repairs or resurfacing
- Mention if the room is upstairs or in a flat
Getting a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Read more
Covering Sculthorpe
Sculthorpe is about 13 miles north-west of Dereham, in Norfolk. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Sculthorpe is one of 797 towns and villages in Norfolk where we work.
Here we cover the NR21 postcode area. We regularly work on streets such as The Street, Foundry Close and Creake Road. Other places close to Sculthorpe include Hempton (1 mile south), Fakenham (1 mile south-east), West Barsham (2 miles north), Pudding Norton (2 miles south-east) and East Barsham (2 miles north-east). Larger places within reach include Dereham (13 miles south-east), Swaffham (15 miles south), Hunstanton (15 miles north-west), Holt (12 miles east), Heacham (15 miles west) and Wells-next-the-Sea (8 miles north).
Landmarks near Sculthorpe
In Sculthorpe, that means homes near Church of St Mary and All Saints, Fakenham Academy and Sculthorpe Church of England Primary Academy, among other places. A little further out are Fakenham Museum of Gas and Local History (1.6 miles south-east). Not far away are Pensthorpe Nature Reserve and Beacon Hill.
Work for landlords and builders
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Your questions about bath re-enamelling in Sculthorpe
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
How much does bath re-enamelling cost in Sculthorpe?
Prices start from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up and a photo of the whole item and your postcode.
How do I book?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Sculthorpe.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Do you come to Sculthorpe?
Yes. We cover the whole UK and come to Sculthorpe and the rest of Norfolk. Send photos and we’ll quote, or call 0345 017 0787.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Is there a call-out fee?
We don’t add a call-out fee. Your fixed quote includes everything.
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What a repair can’t fix
Not everything can be repaired, and we will tell you before we start. We cannot fix:
- Problems we can’t see until an old finish comes off
- Steel that has corroded right through
- Acrylic that moves when you stand in it
Not sure? Send pictures and we will give you a straight answer before booking.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
What affects the price in Sculthorpe
Prices start from £350. You won’t pay by the hour. The price depends on:
- Where the damage is and how we get to it
- Doing more than one item at once
- The material
- Previous DIY repairs that have to come out
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.
Send photos for a quote
A couple of clear pictures is all it takes. Try to include:
- Something in shot to show the size
- Where you are, by postcode
- A wider photo showing the entire bath
- The material, if you know it
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- Leave the bath for the full curing time before using it
- Do not leave a chip unrepaired
- Dry the bath after use to stop limescale
- Rinse off hair dye, oils and bath bombs straight away
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
