East Riding of Yorkshire · England
Bath re-enamelling & resurfacing in Seaton, East Riding of Yorkshire
We travel to Seaton for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Staining under the taps and around the waste
- A dull, rough surface that won’t come clean
How we handle bath re-enamelling in Seaton
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. Our repair technicians work on basins & shower trays, pressed steel baths and Victorian roll-tops, and people most often call us about a roll-top that’s seen better days and a dull, rough surface that won’t come clean.
Big or small, you get the same one-year guarantee in Seaton and across East Riding of Yorkshire.
- Area
- Seaton (HU11)
- Area hub
- East Riding of Yorkshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Also in Seaton
What we’re called out for in Seaton
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Look out for any of the following:
- Several chips and rust patches
- Worn patches where water runs and sits
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
Before booking anyone
- What preparation is included
- Whether the price is fixed and includes VAT
- Whether the colour is mixed to match
- The length of the guarantee and what it covers
What affects the price in Seaton
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- Any earlier repairs that need removing first
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
How to get a fixed price
Photographing the damage takes a minute, and it saves a visit. Please include:
- A coin or ruler next to the damage for scale
- The material, if you know it
- Good light, ideally daylight, without flash glare
- A wider photo showing the entire bath
If you’re in Seaton and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Seaton and the surrounding area
Seaton is about 9 miles north-east of Beverley, in East Riding of Yorkshire. We travel to homes and businesses in Seaton, so there is no workshop to go to. Seaton is one of 299 towns and villages in East Riding of Yorkshire we cover. You can also see our page for Leeds, about 54 miles away.
We cover every part of the HU11 postcode area and the streets around it. You’ll find streets such as Main Street, Manor Park and Breamer Lane. We also travel to Catfoss (2 miles north-west), Bewholme (2 miles north), Skipsea Brough (5 miles north), Beeford (5 miles north-west) and Skipsea (5 miles north). We also work in nearby towns such as Beverley (9 miles south-west), Bridlington (13 miles north), Driffield (11 miles north-west), Hessle (15 miles south-west), Cottingham (11 miles south-west) and Hornsea (3 miles east).
Local landmarks in Seaton
Around Seaton, we work in homes near Hornsea School and Language College, Sigglesthorne Church of England Primary Academy and Church of St Lawrence. Further afield, we also cover the area around Hornsea Cottage Hospital (2.7 miles east). Green spaces nearby include Hornsea Mere.
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
DIY repairs versus a professional job
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
Questions from Seaton
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
Can pets and children be at home?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Seaton.
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Can you quote from photos?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What do you need from me?
Just photos, your postcode and a contact number. On the day, access to the room.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
What we do, step by step
On the day itself, there is little for you to do. Let us in and show us the room, and we will get on with it. The job generally runs to a full day, tidy-up included.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Tell us about any previous repairs or coatings
- Clear toiletries, mats and anything else from around the area
Ask for a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Related advice
When a repair is not the answer
It helps to know what we can’t do:
- An acrylic bath that flexes badly underfoot
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
If in doubt, send photos and we’ll say what we think.
Materials we work on in Seaton
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Dry the bath after use to stop limescale
- Store bottles off the bath
- Keep suction mats out of the bath
- Leave the bath for the full curing time before using it
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
