Norfolk · England
Bath Re-enamelling in Seething
Problem with your bath in Seething? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A roll-top that’s seen better days
- Several chips and rust patches
About our bath re-enamelling in Seething
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We’re frequently asked to fix worn patches where water runs and sits and a bath in a colour that no longer suits, on cast iron baths, Victorian roll-tops and basins & shower trays.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Seething (NR15)
- Region
- Norfolk
- Cover
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Our work in Seething
Seething is about 9 miles south-east of Norwich, in Norfolk. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. Seething is one of 797 towns and villages in Norfolk where we work.
We cover every part of NR15. That includes homes on Brooke Road and Seething Street. Other places close to Seething include Mundham Common (1 mile east), Mundham (1 mile east), Upgate (1 mile south), Sisland (2 miles east) and Thurton (2 miles north). Within a short drive, we also cover Norwich (9 miles north-west), Great Yarmouth (14 miles east), Wymondham (13 miles west), Gorleston-on-Sea (13 miles east), Sprowston (10 miles north-west) and Thorpe St Andrew (8 miles north-west).
Near you in Seething
Our customers here include homes close to Hobart High School, Seething and Mundham Primary School and Church of St Margaret, among other places. A little further out are Claxton Castle (3.7 miles north).
Towns and villages near Seething
Also in Seething
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Respect the curing time we give you
- Fix dripping taps quickly
- Don’t leave a chip unrepaired
- Keep toiletries on a shelf rather than in the bath
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Common problems we fix in Seething
Hard water speeds up the wear, and abrasive cleaners do the most damage.
The things customers usually mention when they call include:
- A bath in a colour that no longer suits
- A period or roll-top bath worth keeping
- An old resurfacing that’s failing
- A bath that stays dull however much you clean it
What to look for in a quote
- How the colour is matched
- Whether the price covers travel
- A fixed price, and whether VAT is included
- What prep work is covered
Your questions about bath re-enamelling in Seething
Do you work in Seething?
We do. We send a technician to Seething for every job, and the price is the same as everywhere else.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is a repair better than a new one?
Generally, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
How do I book?
Photos of the damage, a picture of the entire bath and your postcode. Then we’ll agree a date.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Can you quote from pictures?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
How we price bath re-enamelling
Resurfacing from £350. We do not charge extra for travel to Seething. The price comes down to:
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
- The colour and finish to match
- Doing more than one item at once
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed quote
Photographing the damage takes a minute, and it saves a visit. Please include:
- One picture of the entire bath
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
- Any details about the material
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Repair or replace in Seething?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why Seething clients choose us
- One price list for the whole UK
- Colour-matched on site
- CHAS and Constructionline accredited
- Honest advice, even when it means no job
See our full price list and guide to resurfacing and replacement costs.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
How the visit works
You don’t need to empty the room beforehand. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we’re doing. Most jobs take the best part of a day, and you can get on with other things while we are there.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
Getting ready for the visit
- Clear the area around the damage
- Open a window if you can
- Plan for the room to be out of bounds to pets and children
Ask for a price
If you’re in Seething and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Landlords, agents and businesses in Seething
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
