Norfolk · England
Bath chip & crack repair in Seething, Norfolk
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Seething and across Norfolk. Send photos for a free, fixed quote.
- Repairs from £95
- A hole punched through by something heavy
- A chip where the taps sit
Bath repair in Seething without replacing anything
A typical bath repair is a few hours’ work, and you can usually bathe again the following day. You will not need a plumber or tiler, because the bath doesn’t move. Our repair technicians work on pressed steel enamel, roll-top & freestanding and acrylic, and people most often call us about rust by the waste and overflow and damage done while the bathroom was being fitted.
We stand behind the work with a one-year guarantee.
- Where
- Seething (NR15)
- County
- Norfolk
- Cover
- 12 months on all our work
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Why repair rather than replace?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Prices start from £95. Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why us?
- Straight answers about what a repair can do
- A fixed quote before booking
- Work done at your home or business
- We leave the room as we found it
Take a look at our pricing or guide to resurfacing and replacement costs.
Towns and villages near Seething
Other services in Seething
Where we work around Seething
Seething is about 9 miles south-east of Norwich, in Norfolk. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. We cover 797 places across Norfolk, from the larger towns to small villages.
Every address in NR15 is within our area. Whether you live on Brooke Road and Seething Street or anywhere nearby, a technician can come to you. We also travel to Mundham Common (1 mile east), Mundham (1 mile east), Upgate (1 mile south), Sisland (2 miles east) and Thurton (2 miles north). We also work in nearby towns such as Norwich (9 miles north-west), Great Yarmouth (14 miles east), Wymondham (13 miles west), Gorleston-on-Sea (13 miles east), Sprowston (10 miles north-west) and Thorpe St Andrew (8 miles north-west).
Near you in Seething
Locally, our jobs take us to homes close to Hobart High School, Seething and Mundham Primary School and Church of St Margaret, among other places. Nearby you will also find Claxton Castle (3.7 miles north).
FAQs for Seething
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.
Can I get a quote without a visit?
In nearly every case. If pictures do not show enough, we’ll ask for another angle.
Do you charge for travel?
There is no separate call-out charge. The fixed quote covers the visit and the work.
What happens next?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.
How do I get a price for bath repair in Seething?
Prices start from £95. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo with your NR15 postcode.
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help.
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes a morning or an afternoon. If anything looks different from your photos, we’ll talk to you before going ahead.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Let us know which floor the room is on
- Plan for the room to be out of bounds to pets and children
Getting a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Read more
What affects the price in Seething
Prices start from £95. Each job gets its own fixed price. This is what makes a difference:
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- The size and number of damaged areas
- The colour and finish to match
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from pictures
Most quotes are done from photos alone. To help us price it:
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
- Any details about the material
- Your postcode, so we can check dates
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Do you need bath repair in Seething?
Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Fittings cause damage too: water collects there, so chips nearby rust quickly.
Signs it’s time to call us include:
- Cracks in an acrylic bath
- Rust by the waste and overflow
- Scuffs and scratches in the surface
- Chips on the rim or sides
What to look for in a quote
- If travel is included in the price
- How the room is protected while they work
- What happens if they find more damage
- Is the price fixed, and does it include VAT?
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Wear across the whole surface, which needs re-enamelling
- A bath that moves underfoot, until its support is fixed
- Cracks in parts of an acrylic bath we can’t get to from below
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Cover the bath during DIY or decorating
- Fix dripping taps early to stop staining and limescale
- Give the bath a quick rinse after use
- If an acrylic bath flexes, have its feet adjusted
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Remove it before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
