Wrexham · Wales
Bath Re-enamelling in Sesswick
Damaged bath in Sesswick? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Brown or grey marks that don’t clean off
About our bath re-enamelling in Sesswick
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Whether it’s wear marks under the taps and a bath in a colour that no longer suits, we can help, whatever the material.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we’ve gone.
- Where
- Sesswick (LL13)
- County
- Wrexham
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Fix dripping taps quickly
- Get any chip repaired quickly
- Rinse off hair dye, oils and bath bombs straight away
- Do not leave bottles, razors or sponges standing on the surface
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
Repair or replace in Sesswick?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Prices start from £350. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before you book.
Why Sesswick clients choose us
- Dust sheets down, tidy finish
- We come to you, anywhere in the UK
- A year’s guarantee on all work
- No need to remove anything
Take a look at our pricing and resurfacing vs replacement cost guide.
How the visit works
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes a full day. At the end we talk you through the curing time and the aftercare.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
Preparing for the visit
- Let us know about parking or access
- Move bottles, mats and clutter away from the area
- Make sure the room can be ventilated
Getting a price
If you’re in Sesswick and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
Where we work around Sesswick
Sesswick is about 3 miles south-east of Caia Park, in Wrexham. Across the LL13 area, a technician comes to you. We work in 115 places in Wrexham, from the larger towns to small villages. We work right across the region, from Sesswick to Liverpool (27 miles away).
Our visits in LL13 are booked in the same way as anywhere else. That includes homes on Kiln Lane, Bedwell Road and Fern Close. Close by, we cover Cross Lanes (1 mile south-west), Pentre Maelor (1 mile north-west), Redwither (1 mile north), Bangor-is-y-coed (1 mile south-east) and Bedwell (1 mile south-west). Further out, we also cover Wrexham (3 miles north-west), Caia Park (3 miles north-west), Offa (4 miles west), Rhosllannerchrugog (5 miles west), Rhosddu (4 miles north-west) and Acton (4 miles north-west).
Landmarks near Sesswick
We visit homes around Cross Lanes Hotel & Brasserie and the streets around them. The nearest railway station is Wrexham Central station, about 3.7 miles north-west. Well-known places in the area include Wrexham Maelor Hospital (4.1 miles north-west) and Wrexham Doll And Toy Museum (3.5 miles west). Not far away are Bryn-y-hafod and Pant-yr-ochain Big Pool.
How we price bath re-enamelling
Resurfacing from £350. There’s no area surcharge for Sesswick. What changes the price is:
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
How to get a fixed quote
It only takes a minute to photograph the damage. Try to send:
- One picture of the whole bath
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
- Any details about the material
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Sesswick questions
What if the damage is worse than the photos show?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that is in the quote.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
How much does bath re-enamelling cost in Sesswick?
Prices start from £350. We give a fixed price based on photos of the damage. Send a close-up and a photo of the whole item with your LL13 postcode.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Problems we can’t see until an old finish comes off
- A metal bath with a through crack
- A bath that’s rusted through
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Sesswick
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
When to call us in Sesswick
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Common reasons people in Sesswick contact us include:
- Several chips and rust patches
- Worn patches where water runs and sits
- A peeling or bubbling previous coating
- Stains that won’t shift
Before you book anyone
- Who will actually do the work
- What preparation is included
- How long the guarantee is and what it covers
- Whether they match the colour on site
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
More services for Sesswick
About our accreditations · Every repair comes with a one-year guarantee.
