Buckinghamshire · England

Bath Re-enamelling for Shalstone homes

Damaged bath in Shalstone? We repair it in place, mix the colour on the day and guarantee the work for a year.

  • Resurfacing from £350
  • Worn patches where water runs and sits
  • An old resurfacing that is failing
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Shalstone

Bath re-enamelling in Shalstone without replacing anything

We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. We regularly repair acrylic baths, pressed steel baths and basins & shower trays, and common reasons people get in touch are a period or roll-top bath worth keeping and an old resurfacing that’s failing.

Whatever the size of the job, it’s backed by a one-year guarantee.

Before and after: an old basin refinished to bright white
Location
Shalstone (MK18)
County
Buckinghamshire
Guarantee
12 months on all our work
Quote
From £350. Free and fixed, from your pictures
Call
0345 017 0787
Last updated
23 October 2026

The process

Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. Most jobs take a full day, and you are welcome to carry on with your day while we work.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure until the day after.

Before we arrive

  • Mention if the room is upstairs or in a flat
  • Keep a parking space free if you can
  • Move bottles, mats and clutter away from the area

Ask for a price

For a price in Shalstone, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Get a free quote

Related advice

Prices and what affects them

Resurfacing from £350. We charge the same across the UK, including Shalstone. The price reflects:

  • The material
  • The colour and finish to match
  • The type of damage
  • How many areas need work

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

How to get a fixed price

Phone photos are fine. Make sure they show:

  • The material, if you know it
  • Your postcode, so we can check dates
  • A clear, close picture of the problem area
  • Something in shot to show the size

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.

Signs you need bath re-enamelling in Shalstone

Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.

People typically call us after spotting something like this:

  • Enamel that is lost its shine and feels rough
  • Brown or grey marks that don’t clean off
  • A peeling or bubbling previous coating
  • A period or roll-top bath worth keeping

What to look for in a quote

  • Aftercare advice
  • Whether the price is fixed and includes VAT
  • What prep work is covered
  • What protection goes down before work starts

10 questions to ask before you book

Looking after it afterwards

A little care keeps the finish looking good. Our advice:

  • Fix dripping taps quickly
  • Never use suction bath mats
  • Have chips seen to early
  • Rinse off hair dye, oils and bath bombs straight away

Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.

Materials and what they mean for the repair

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Acrylic

We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.

DIY kit or professional repair?

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

Questions from Shalstone

Will the bath be moved?

Not at all. We work on the bath in place, with the room masked and ventilated.

Can you redo someone else’s repair?

Generally, yes. Let us know what was used before.

Is it worth repairing rather than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.

What areas do you cover?

The whole UK, including all of Buckinghamshire. Send your postcode with your photos and we will confirm dates.

Is my repair covered?

Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.

What does bath re-enamelling cost?

Resurfacing from £350. Because every job differs, we price from photos. You will get a fixed figure before you book.

Can you do the outside of a roll-top?

Yes, frequently. We resurface the inside, and the outside can be refinished too.

Is it messy?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Honest limits

To be straight with you, some problems need a different fix:

  • Leaks from fittings rather than the bath
  • Problems we cannot see until an old finish comes off
  • Steel that has corroded right through

Not sure? Send pictures and we’ll give you a straight answer before booking.

What we work on

  • Acrylic baths
  • Pressed steel baths
  • Victorian roll-tops
  • Basins & shower trays
  • Cast iron baths

Shalstone and the surrounding area

Shalstone is about 4 miles east of Brackley, in Buckinghamshire. Customers in Shalstone get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Shalstone is one of 263 places in Buckinghamshire we cover. Our nearest city page is Birmingham, about 47 miles away.

Jobs in MK18 work the same way as everywhere else we cover. Close by, we cover Westbury (1 mile south-west), Water Stratford (2 miles south), Dadford (2 miles north-east), Radclive (3 miles south-east) and Chackmore (3 miles east). We also work in nearby towns such as Buckingham (4 miles south-east), Winslow (10 miles south-east), Steeple Claydon (7 miles south-east), Tingewick (3 miles south), Whitchurch (14 miles south-east) and Quainton (12 miles south-east).

Around Shalstone

Around Shalstone, we work in homes near Church of St Edward. Well-known places in the area include Beaumont Castle (2.6 miles south-west) and The Menagerie (2 miles east). The countryside around Shalstone includes Buckingham Sand Pit.

Map of Shalstone © OpenStreetMap contributors

Why repair rather than replace?

Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Prices start from £350. We charge the same wherever you are, with no extra for Shalstone. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why choose Surface Doctor in Shalstone

  • Honest advice, even when it means no job
  • Colours mixed by hand to suit your surface
  • Every repair guaranteed for a year
  • Work done at your home or business

See our full price list and resurfacing vs replacement cost guide.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.