Wigan · England
Bath Re-enamelling for Shevington Moor homes
Problem with your bath in Shevington Moor? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A bath in a colour that no longer suits
Do you need bath re-enamelling in Shevington Moor?
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Customers typically contact us about:
- An old resurfacing that is failing
- An original cast iron bath that needs restoring
- Staining under the taps and around the waste
- Wear marks under the taps
Questions to ask before booking
- Whether they match the colour on site
- What preparation is included
- How your room will be protected
- How changes to the job are handled
Bath re-enamelling in Shevington Moor, done in place
We don’t move the bath, so your taps, tiles and plumbing are left alone. It usually takes one visit, with the bath ready to use the following day. We regularly repair pressed steel baths, Victorian roll-tops and acrylic baths, and common reasons people get in touch are lots of chips and rust spots and thin, worn enamel in places.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Shevington Moor (WN6)
- Area hub
- Wigan
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Why repair rather than replace?
A replacement frequently means several trades over several days. Re-enamelling is one technician, normally one day. Resurfacing from £350, with every job priced individually. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
What you get with us
- Straight answers about what a repair can do
- A year’s guarantee on all work
- No extra charge for your area
- Most jobs done in one visit
See our prices page or bath cost comparison.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
What we do, step by step
There’s not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. Most visits take most of the day.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Let us know about parking or access
- Have somewhere for us to park nearby if possible
- Clear the area around the damage
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
Read more
Shevington Moor and the surrounding area
Shevington Moor is about 1 mile west of Standish, in Wigan. Across the WN6 area, we carry out the work at your property. We cover all 63 towns and villages across Wigan. You can also see our page for Liverpool, about 16 miles away.
All of WN6 is within our area, from the main roads to the quietest streets. Whether you live on Douglas Road, Old Pepper Lane and Red Clover Gardens or anywhere nearby, a technician can come to you. We also cover the places around Shevington Moor: Hunger Hill (1 mile north-west), Standish (1 mile east), Shevington (1 mile south), Worthington (2 miles east) and Crooke (2 miles south). Within a short drive, we also cover Wigan (4 miles south-east), Leigh (9 miles south-east), Ashton-in-Makerfield (7 miles south), Hindley (6 miles south-east), Atherton (9 miles south-east) and Ince-in-Makerfield (5 miles south-east).
What’s near Shevington Moor
In Shevington Moor, that means homes near St Joseph's Catholic Primary School, Foresters Arms and Church of St Joseph and Attached Presbytery and the streets around them. Nearby too are Ashfield Park (1.7 miles south-east) and Standish Community High School (within half a mile east). The nearest railway station is Appley Bridge station, roughly 1.7 miles south-west. Other landmarks nearby include Blackrod Castle Croft (4.4 miles east) and Wrightington Hospital (1.1 miles west).
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Keeping it looking good
Simple care helps the repair last. Our advice:
- Stick to gentle, non-abrasive cleaners
- Don’t use the bath until it has fully cured
- A quick wipe after use keeps limescale away
- Get any chip repaired quickly
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Shevington Moor: your questions answered
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How long does re-enamelling last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Are there extra charges for Shevington Moor?
We do not add a call-out fee. The fixed price covers the visit and the work.
Do you work in Shevington Moor?
Yes, we do. Technicians travel to Shevington Moor from across the region, and the price is the same as everywhere else.
Do you resurface freestanding baths?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- An acrylic bath that flexes badly underfoot
- Steel that has corroded right through
- A cast iron or steel bath that is cracked right through
Send us pictures and we will tell you honestly before booking.
Materials we work on in Shevington Moor
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Prices and what affects them
Prices start from £350. You will know the full cost before you book. We take into account:
- The size and number of damaged areas
- The material
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your pictures
You can typically get a fixed price without us visiting. To help us price it:
- The material, if you know it
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Towns and villages near Shevington Moor
Also in Shevington Moor
About our accreditations · Every repair comes with a one-year guarantee.
