Oxfordshire · England
Bath Re-enamelling in Shirburn
Local bath re-enamelling for Shirburn: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- A coloured bath you want in white
Bath re-enamelling at your home in Shirburn
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s an old resurfacing that’s failing and a coloured bath you want in white, we can help.
Every repair comes with a one-year guarantee, wherever you are in Oxfordshire.
- Area
- Shirburn (OX49)
- County
- Oxfordshire
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace in Shirburn?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Why choose Surface Doctor in Shirburn
- Colour-matched on site
- Honest advice, even when it means no job
- No need to remove anything
- Every repair guaranteed for a year
See our full price list and bath cost comparison.
Also near Shirburn
Also in Shirburn
How it works
We turn up at the time we agreed with you and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. Most visits take the best part of a day, and the room is left clean and tidy.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the next day.
How to prepare
- Open a window if you can
- Mention if the room is upstairs or in a flat
- Mention any earlier repairs or resurfacing
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Advice
Prices and what affects them
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- Doing more than one item at once
- Access to the area
- What kind of damage it is
- What the surface is made of
Compared with replacing, repairing generally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Quotes from your photos
Phone photos are fine. Just make sure we can see:
- One sharp close-up of the damage
- Where you are, by postcode
- A coin or ruler next to the damage for scale
- Details of any past repairs
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and no obligation.
Shirburn and the surrounding area
Shirburn is about 6 miles south of Thame, in Oxfordshire. Wherever you are in the OX49 postcode area, we carry out the work at your property. Shirburn is one of 443 towns and villages in Oxfordshire we cover. You can also see our page for London, about 40 miles away.
Our visits in OX49 are booked in the same way as anywhere else. Streets in the area include Watlington Road, Castle Road and Blenheim Road, and we cover them all. If you’re just outside Shirburn, we cover Lewknor (1 mile north-east), South Weston (2 miles north), Christmas Common (2 miles south-east), Postcombe (2 miles north) and Howe Hill (3 miles south). We also work in nearby towns such as Oxford (12 miles north-west), Didcot (11 miles west), Abingdon-on-Thames (13 miles west), Thame (6 miles north), Henley-on-Thames (9 miles south-east) and Benson (5 miles south-west).
Landmarks near Shirburn
Typical jobs here are in homes near Watlington Primary School, Icknield Community College and St Mary's Church, among other places. Nearby too are All Saints Church (less than half a mile west) and The Chequers pub (0.9 miles south-west). For a walk, there is Aston Rowant NNR and Bald Hill.
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Acrylic that moves when you stand in it
- Problems we can’t see until an old finish comes off
- A bath that is rusted through
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
Shirburn: your questions answered
How much does bath re-enamelling cost in Shirburn?
Prices start from £350. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your OX49 postcode.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Can landlords book you?
Yes, frequently. We can quote for several properties together and work between tenancies.
What areas do you cover?
All of Oxfordshire, and the rest of the UK. Travel is included in the price.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before and we’ll plan for it.
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Repair dripping taps early
- Get any chip repaired quickly
- Stick to gentle, non-abrasive cleaners
- Store bottles off the bath
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Landlord and trade work in Shirburn
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
About our accreditations · Every repair comes with a one-year guarantee.
