Southampton · England
Bath re-enamelling & resurfacing in Shirley, Southampton
Problem with your bath in Shirley? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- An old resurfacing that’s failing
Bath re-enamelling in Shirley without replacing anything
If your bath is sound but looks tired, re-enamelling is typically the most cost-effective option. There is no removal, plumbing or tiling involved. If you are dealing with a peeling or bubbling previous coating and lots of chips and rust spots, we can normally put it right.
The work is covered for a year after we finish. Just call us if there is a problem and we will come back.
- Location
- Shirley (SO15, SO16, SO17)
- Region
- Southampton
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Shirley
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
What happens on the day
Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes the best part of a day, and the room is left clean and tidy.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the next day.
Preparing for the visit
- Let us know if it has been repaired before
- Have a window or extractor fan available
- Clear toiletries, mats and anything else from around the area
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Related advice
Repair or replace in Shirley?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing usually wins. Prices start from £350. Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why choose Surface Doctor in Shirley
- CHAS and Constructionline accredited
- Free fixed quotes from pictures
- Colour mixed on the day to match
- We leave the room as we found it
Take a look at our pricing and bath cost comparison.
Signs you need bath re-enamelling in Shirley
Often the bath has just had decades of use. Underneath, a cast iron or steel bath is normally as strong as ever.
Common reasons people in Shirley contact us include:
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
- Brown or grey marks that do not clean off
- A coating lifting around the plughole
Before booking anyone
- How long the guarantee is and what it covers
- Aftercare advice
- What preparation is included
- How changes to the job are handled
Towns and villages near Shirley
What else we do in Shirley
Common questions in Shirley
Do you work in Shirley?
Yes. We cover the whole UK and travel to Shirley. Send us photos for a fixed quote, or call 0345 017 0787.
What information do you need?
Some photos, your postcode and how to reach you. On the day, access to the room.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
What if the damage is worse than the photos show?
Your quote covers the damage in the photos. If there is more, we will tell you before starting.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Do the materials smell?
There can be some smell while we work. It fades as everything cures.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
Honest limits
Before you book, it’s worth knowing the limits too:
- Steel that has corroded right through
- Problems we can’t see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Where we work around Shirley
Shirley is about 2 miles west of Southampton, in Southampton. Wherever you are in the SO15 postcode area, a technician comes to you. Shirley is one of 40 towns and villages in Southampton where we work. Our jobs stretch from Shirley to London (about 70 miles away).
Jobs in SO15, SO16 and SO17 work the same way as everywhere else we cover. From May Road, Dyer Road and York Road or a nearby road, we can come to you. You will find Shirley on the A3057, so it’s easy for us to reach. We also travel to Regents Park (1 mile west), Freemantle (1 mile south), Millbrook (1 mile south-west), Coxford (1 mile north-west) and Maybush (1 mile north-west). Larger places within reach include Townhill Park (3 miles east), Midanbury (3 miles east), Thornhill (4 miles east), Chartwell Green (4 miles east), Harefield (4 miles east) and Itchen (3 miles south-east). As one of the bigger places in Southampton, Shirley is somewhere we visit often.
Around Shirley
Around Shirley, we work in homes near Millbrook Community School, St James' Park and Shirley Parish Church. Other local landmarks include Regents Park Community College (under half a mile west), The Crown Public House (within half a mile north-west) and Wordsworth Primary School (within half a mile north). The closest station to Shirley is Millbrook (Hants) station, roughly 0.7 miles south. Other landmarks nearby include Netley Castle (4.4 miles south-east) and Foresters Museum & Archive (1 mile south-east). Green spaces nearby include Testwood Lakes.
How we price bath re-enamelling
Prices start from £350. We give every job a fixed quote from pictures. These are the things that affect it:
- Access to the area
- How many items we do on one visit
- How much damage there is
- What kind of damage it is
We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
A couple of clear pictures is all it takes. Try to include:
- Something in shot to show the size
- The postcode, so we can plan the visit
- A photo taken from further back
- Whether it’s been repaired or coated before
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
