Leicestershire · England
Bath re-enamelling & resurfacing in Sibson, Leicestershire
Our technicians come to Sibson for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- Enamel that is lost its shine and feels rough
When to call us in Sibson
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Typical reasons for a call-out include:
- An old resurfacing that is failing
- Several chips and rust patches
- Stains that won’t shift
- A dull, rough surface that won’t come clean
What to look for in a quote
- How the room is protected while they work
- Whether they match the colour on site
- What happens if the damage is worse than the pictures show
- If travel is included in the price
Bath re-enamelling in Sibson, done in place
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we don’t cut corners on it. Our repair technicians work on basins & shower trays, acrylic baths and pressed steel baths, and common reasons people get in touch are enamel that’s lost its shine and feels rough and a peeling or bubbling previous coating.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Location
- Sibson (CV13)
- County
- Leicestershire
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
The process
We turn up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take most of the day, and the room is left clean and tidy.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Keep a parking space free if you can
- Open a window if you can
- Make sure the area is dry
Getting a price
Send us pictures of the damage and one of the entire item, with your CV13 postcode, and we’ll come back with a fixed quote.
Related advice
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
How we price bath re-enamelling
Resurfacing from £350. Each job gets its own fixed price. This is what makes a difference:
- The size and number of damaged areas
- The material
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.
How to get a fixed price
Two or three clear pictures are normally enough. It helps if you send:
- One picture of the whole bath
- Good light, ideally daylight, without flash glare
- Details of any past repairs
- A coin beside the damage so we can judge size
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
When we would advise against a repair
Not everything can be repaired, and we would rather say so up front. Repairs will not solve:
- Leaking taps or wastes (a plumber’s job)
- A bath that is rusted through
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we will say what we think.
What we work on
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
Towns and villages near Sibson
What else we do in Sibson
For landlords and businesses
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Looking after it afterwards
How the surface is treated afterwards matters:
- Get any chip repaired quickly
- Dry the bath after use to stop limescale
- Leave the bath for the full curing time before using it
- Avoid suction-cup mats
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale can’t build up.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
Common questions in Sibson
Can you quote from pictures?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders in Sibson.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
What information do you need?
Send pictures through the quote form or call 0345 017 0787.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Can you repair something that’s been repaired before?
Typically, yes. We remove the old repair before doing a new one, so mention it when you send photos.
Will the price change on the day?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
About Sibson
Sibson is about 6 miles north of Nuneaton, in Leicestershire. From the centre of Sibson to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 287 places across Leicestershire, from the larger towns to small villages. Our jobs stretch from Sibson to Birmingham (about 20 miles away).
Postcode districts we cover here: CV13. That includes homes on Manor View, Sheepy Road and Twycross Road. We also travel to Wellsborough (1 mile north-east), Little Twycross (3 miles north), Bilstone (3 miles north), Congerstone (3 miles north) and Market Bosworth (3 miles east). Larger places within reach include Hinckley (6 miles south-east), Coalville (10 miles north-east), Ashby-de-la-Zouch (10 miles north), Shepshed (14 miles north-east), Lutterworth (15 miles south-east) and Blaby (13 miles east).
Around Sibson
In Sibson, that means homes near Church of St Botolph and the streets around them. For rail, the closest station is Atherstone station, about 3.5 miles south-west of the centre. Well-known places in the area include Ratcliffe Culey (1.8 miles south-west) and Atherstone Heritage Centre (3.4 miles south-west). Green spaces nearby include Ambion Hill.
About our accreditations · Every repair comes with a one-year guarantee.
