Blaenau Gwent · Wales
Bath Re-enamelling in Sirhowy
We travel to Sirhowy for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- A bath in a colour that no longer suits
Bath re-enamelling in Sirhowy without replacing anything
When a bath is structurally fine but worn out on the surface, re-enamelling is normally the most cost-effective option. There is no removal, plumbing or tiling involved. Our technicians work on Victorian roll-tops, basins & shower trays and acrylic baths, and people most frequently call us about a roll-top that’s seen better days and chips and rust in more than one place.
All our work comes with our one-year guarantee.
- Where
- Sirhowy (NP22)
- Region
- Blaenau Gwent
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Questions from Sirhowy
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Which areas do you work in?
Everywhere in the UK, Sirhowy included. There is no extra charge for travel.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Will the bath be moved?
Not at all. We work on the bath in place, with the room masked and ventilated.
Are there extra charges for Sirhowy?
Travel is included in the price, and we charge the same wherever you are.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
How the visit works
We turn up when we said we would and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a full day, and we leave the room as we found it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Mention any earlier repairs or resurfacing
- Make sure the area is dry
- Tell us about parking, stairs or access
Getting a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Related advice
Covering Sirhowy
Sirhowy is about 1 mile north of Tredegar, in Blaenau Gwent. Clients in Sirhowy get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. Sirhowy is one of 56 places in Blaenau Gwent we cover. Our nearest city page is Birmingham, about 75 miles away.
Jobs in NP22 work the same way as everywhere else we cover. You’ll find streets such as Scwrfa Road, Picton Road and Maple Avenue, all of which we cover. We also cover the places around Sirhowy: Sgwrfa (1 mile north-west), Dukestown (1 mile north-west), Tredegar (1 mile south), Ashvale (1 mile west) and Nant-y-bwch (1 mile north-west). We also work in nearby towns such as Abertillery (6 miles south-east), Brynmawr (3 miles east), Blaenau Gwent (6 miles south-east), Penrhiwgarreg (6 miles south-east), Pen-y-bont (6 miles south-east) and Nantyglo (3 miles east).
Local landmarks in Sirhowy
In Sirhowy, that means homes near Glanhowy Primary School, Belle Vue Inn and Tredegar Comprehensive School. Sirhowy’s nearest station is Ebbw Vale Town station, about 1.9 miles east of the centre. Further afield, we also cover the area around Festival Park (3.2 miles south-east) and Tredegar General Hospital (0.9 miles south). Open spaces near Sirhowy include Bryn-serth and Glyncoed Lake.
When to call us in Sirhowy
A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
People generally call us after spotting one of these:
- Wear marks under the taps
- Lots of chips and rust spots
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
What your quote should include
- Whether the colour is mixed to match
- When it can be used again
- How to look after the finish
- Whether the price is fixed and includes VAT
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Wipe the bath dry after use in hard water areas
- Keep suction mats out of the bath
- Respect the curing time we give you
- Get any chip repaired quickly
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Why repair rather than replace?
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Sirhowy customers choose us
- Honest advice, even when it means no job
- A year’s guarantee on all work
- No need to remove anything
- We come to you, anywhere in the UK
See our prices page and guide to resurfacing and replacement costs.
When we would advise against a repair
A repair isn’t always the answer, and we’d rather say so up front. We cannot fix:
- A metal bath with a through crack
- Leaks from fittings rather than the bath
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we will say what we think before you book.
What we work on
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Also in Sirhowy
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
For landlords and businesses
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
We regularly work with letting and managing agents. Send the address, photos and access details and we’ll handle the rest.
About our accreditations · Every repair comes with a one-year guarantee.
