Rotherham · England
Bath Re-enamelling for Slade Hooton homes
Our repair technicians come to Slade Hooton for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A period or roll-top bath worth keeping
Slade Hooton questions
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do you work for landlords and businesses?
Yes, often. We can quote for several properties together and work between tenancies.
Can pets and children be at home?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Is the work guaranteed?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
How we handle bath re-enamelling in Slade Hooton
Most baths are re-enamelled in a day. Nothing is disconnected or removed. Typical jobs include a dull, rough surface that won’t come clean and an original cast iron bath that needs restoring, in Victorian roll-tops, pressed steel baths and basins & shower trays.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Where
- Slade Hooton (S25)
- Region
- Rotherham
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Do you need bath re-enamelling in Slade Hooton?
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
These are the problems we are asked about most:
- An outdated colour you’d like to change
- A dull, rough surface that won’t come clean
- Chips and rust in more than one place
- A coating lifting around the plughole
What your quote should include
- Who will actually do the work
- What aftercare is recommended
- Whether the price covers travel
- What preparation is included
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
When we’d advise against a repair
In fairness, some problems need a different fix:
- Problems we cannot see until an old finish comes off
- A bath split right through the body
- A poorly supported acrylic bath, until it’s firmed up
Send us photos and we will tell you honestly before you book.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Covering Slade Hooton
Slade Hooton is about 2 miles south of Maltby, in Rotherham. Jobs in Slade Hooton are booked in like any other job: a fixed price from your pictures, and a technician at your door on the day. We cover 71 places across Rotherham. You can also see our page for Leeds, about 32 miles away.
Jobs in S25 work the same way as everywhere else we cover. Neighbouring places we cover include Laughton en le Morthen (1 mile south), Throapham (1 mile south), Thurcroft (2 miles west), Dinnington (2 miles south) and Brampton en le Morthen (2 miles west). Larger places within reach include Rotherham (6 miles north-west), Rawmarsh (7 miles north-west), Clifton (6 miles west), Swinton (7 miles north-west), Mexborough (8 miles north-west) and Broom (5 miles west).
Landmarks near Slade Hooton
Our customers here include homes close to Sandbeck Park and Roche Abbey, Laughton All Saints CofE Primary School and Dinnington Comprehensive School, among other places. The nearest railway station is Kiveton Park station, roughly 4.2 miles south of the centre. Nearby you’ll also find Tickhill Castle (4.9 miles north-east) and Rotherham General Hospital (5.4 miles west).
Should you replace it?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, usually one day, with the bath back in use the following day. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, so there is no premium for Slade Hooton. What changes the price is the job itself: how much damage, what it’s made of and how many items.
What you get with us
- No extra charge for your area
- A fixed quote before you book
- CHAS, Constructionline and SafeContractor accredited
- Nothing taken out or refitted
See our full price list or guide to resurfacing and replacement costs.
Different materials, different repairs
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Nearby places to Slade Hooton
What else we do in Slade Hooton
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Get any chip repaired quickly
- Repair dripping taps early
- Wipe the bath dry after use in hard water areas
- Keep suction mats out of the bath
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
How we price bath re-enamelling
Resurfacing from £350. There is no charge for travel to Slade Hooton. The price depends on:
- Whether old repairs or coatings need taking off
- The material and finish
- Unusual colours or finishes
- The type of damage
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what to send:
- A wider photo showing the whole bath
- A close-up of the damage, in focus
- A coin or ruler next to the damage for scale
- Where you are, by postcode
The quickest way to a price is to send two or three photos using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
How the visit works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes a full day. We clean up when we are done and tell you when it’s ready to use.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can usually be used the next day.
How to prepare
- Let the surface dry out before the visit
- Tell us if there are stairs or a lift
- Let us know if it has been repaired before
Ask for a price
Upload a picture of the damage and a wider shot of the whole item, with your S25 postcode, and we will reply with a fixed price.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
