Nottinghamshire · England
Bath re-enamelling & resurfacing in South Scarle, Nottinghamshire
We travel to South Scarle for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- Chips and rust in more than one place
What a repair cannot fix
In fairness, there are a few things a repair will not fix:
- Leaks from fittings rather than the bath
- Holes rusted through the metal
- Problems we can’t see until an old finish comes off
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we work on in South Scarle
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
Bath re-enamelling at your home in South Scarle
Resurfacing renews the entire surface of the bath without taking anything out. It’s the answer when the entire bath is tired rather than one spot. If you are dealing with staining under the taps and around the waste and wear marks under the taps, we can typically put it right, on basins & shower trays, cast iron baths and Victorian roll-tops alike.
Big or small, it’s backed by a one-year guarantee in South Scarle and across Nottinghamshire.
- Where
- South Scarle (NG23)
- County
- Nottinghamshire
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Also near South Scarle
More services for South Scarle
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Covering South Scarle
South Scarle is about 6 miles west of North Hykeham, in Nottinghamshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We work in 329 places across Nottinghamshire, from the larger towns to small villages. Our nearest city page is Leeds, about 56 miles away.
Every address in NG23 is covered. Whether you live on Swinderby Road, Post Office Lane and Amos Lane or a nearby road, we can come to you. We also cover the places around South Scarle: Swinderby (1 mile south-east), Eagle Hall (1 mile north-east), Besthorpe (2 miles north-west), North Scarle (2 miles north) and Collingham (2 miles south-west). Within a short drive, we also cover Newark-on-Trent (7 miles south-west), Retford (14 miles north-west), Balderton (8 miles south), Southwell (11 miles south-west), New Ollerton (12 miles west) and Fernwood (8 miles south).
Landmarks near South Scarle
We visit homes around St Helena's Church and the streets around them. South Scarle’s nearest station is Swinderby station, roughly 1.1 miles east. Other landmarks nearby include Vinas Dolls Gallery (3.6 miles south-west). The countryside around South Scarle includes Tunman Wood.
South Scarle questions
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before and we will plan for it.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Do you work in South Scarle?
Yes, we do. Technicians travel to South Scarle from across the region, and the price is the same as everywhere else.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
What affects the price in South Scarle
Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- The material and finish
- How much damage there is
The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before you book.
How to get a fixed price
Before you send pictures, these tips help us give you a firm price:
- A photo taken from further back
- The material, if you know it
- A clear, close picture of the problem area
- Natural light rather than flash
Most customers in South Scarle get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Signs you need bath re-enamelling in South Scarle
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
People normally call us after spotting one of these:
- An outdated colour you’d like to change
- Enamel that is lost its shine and feels rough
- Staining under the taps and around the waste
- Worn patches where water runs and sits
What to look for in a quote
- Aftercare advice
- Whether there are any call-out or travel charges
- How long the guarantee is and what it covers
- What preparation is included
Should you replace it?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Nothing taken out or refitted
- Colour-matched on site
- A fixed quote before booking
- CHAS and Constructionline accredited
Take a look at our full price list and guide to resurfacing and replacement costs.
How to look after the repair
Looking after the surface is easy, and it makes a real difference:
- Don’t leave bottles, razors or sponges standing on the surface
- Don’t leave a chip unrepaired
- Dry the bath after use to stop limescale
- Respect the curing time we give you
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
How the visit works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes most of the day, and we finish by cleaning up and talking you through the result.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Getting ready for the visit
- Have a window or extractor fan available
- Let us know about parking or access
- Keep pets and children out of the room while we work
How to get a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
