Nottinghamshire · England
Bath re-enamelling & resurfacing in Girton, Nottinghamshire
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Girton. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A coating lifting around the plughole
- Wear marks under the taps
When to call us in Girton
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Customers typically contact us about:
- An old resurfacing that is failing
- Several chips and rust patches
- Staining under the taps and around the waste
- A roll-top that is seen better days
Questions to ask before you book
- How the room is protected while they work
- Whether the price is fixed and includes VAT
- How to look after the finish
- The length of the guarantee and what it covers
How we handle bath re-enamelling in Girton
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. We work on acrylic baths, basins & shower trays and Victorian roll-tops, and common reasons people contact us are thin, worn enamel in places and a bath that stays dull however much you clean it.
All of our repairs are guaranteed for twelve months in Girton and everywhere else. We return to put right any problem with the work.
- Area
- Girton (NG23)
- Area hub
- Nottinghamshire
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- Acrylic that moves when you stand in it
- Steel that has corroded right through
- Problems we cannot see until an old finish comes off
If in doubt, send photos and we will say what we think.
Materials we repair
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
Common questions in Girton
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Will there be a smell?
It depends on the job, but often a little. Open windows and an extractor fan help.
How long is the bath unusable?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Also in Girton
Girton and nearby
Girton is about 7 miles west of North Hykeham, in Nottinghamshire. Jobs in Girton are booked in like any other job: a fixed quote from photos, then a visit to do the work. We cover all 329 towns and villages in Nottinghamshire. We work right across the region, from Girton to Leeds (about 54 miles away).
Jobs in NG23 work the same way as everywhere else we cover. Jobs here include addresses on Procters Drive, Green Lane and West Lane. Neighbouring places we cover include Besthorpe (1 mile south), North Scarle (2 miles east), South Scarle (2 miles south-east), Eagle Hall (3 miles east) and Collingham (3 miles south). We also work in nearby towns such as Newark-on-Trent (8 miles south), Retford (12 miles north-west), Balderton (9 miles south), Southwell (11 miles south-west), Rainworth (15 miles west) and New Ollerton (10 miles west).
Local landmarks in Girton
We visit homes around The Lord Nelson pub and St Cecilia's Church. The nearest railway station is Swinderby station, roughly 2.9 miles south-east. Further afield, we also cover the area around Vinas Dolls Gallery (3.2 miles south-west). For a walk, there’s Tunman Wood.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Keeping it looking good
Simple care helps the repair last. We recommend:
- Use washing-up liquid and a soft cloth
- Get any chip repaired quickly
- Never use suction bath mats
- Wipe the bath dry after use in hard water areas
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
Can I fix it myself?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Should you replace it?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, usually one day, with the bath back in use the next day. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why book with us
- Every repair guaranteed for a year
- Colours mixed by hand to suit your surface
- No need to remove anything
- Most jobs done in one visit
Take a look at our prices page and bath cost comparison.
How it works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes the best part of a day. We tidy up before we leave and tell you when it’s ready to use.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Have somewhere for us to park nearby if possible
- Make sure the room can be ventilated
Getting a price
Upload photos of the damage and a wider shot of the entire item, with your NG23 postcode, and we will reply with a fixed quote.
Read more
What bath re-enamelling costs
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- Any earlier repairs that need removing first
- The material
- Whether we combine several jobs
- How hard the colour is to match
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send pictures for a quote
It only takes a minute to photograph the damage. Please include:
- Any details about the material
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
- Where you are, by postcode
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
About our accreditations · Every repair comes with a one-year guarantee.
