Lincolnshire · England
Bath Re-enamelling for South Witham homes
Bath re-enamelling for South Witham, without a refit. Get a fixed quote from your photos, then book a visit.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- A roll-top that is seen better days
Honest limits
A repair isn’t right for every job, for example:
- A bath that is rusted through
- Problems we can’t see until an old finish comes off
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we’ll give you a straight answer before booking.
What we work on
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
Bath re-enamelling in South Witham without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. If you are dealing with a coating lifting around the plughole and staining under the taps and around the waste, we can help, whatever the material.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we have gone.
- Where
- South Witham (NG33)
- Area hub
- Lincolnshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Also near South Witham
Other services in South Witham
Repairing versus replacing in South Witham
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why book with us
- Rooms protected and left tidy
- We will tell you if it’s not worth repairing
- One price list for the entire UK
- Most jobs done in one visit
Read our pricing and resurfacing vs replacement cost guide.
FAQs for South Witham
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before and we will plan for it.
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Removing the old finish takes extra time, which we include in the price.
Will there be a smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
What areas do you cover?
The entire UK, including all of Lincolnshire. Just include your postcode and we will offer you dates.
When to call us in South Witham
Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is generally perfectly sound.
People typically call us when they notice something like this:
- Chips and rust in more than one place
- Stains that won’t shift
- A peeling or bubbling previous coating
- A coloured bath you want in white
What to look for in a quote
- How to look after the finish
- What protection goes down before work starts
- What happens if the damage is worse than the photos show
- Whether the colour is mixed to match
How the visit works
Visits start with a quick look at the job together. Then the area is sheeted and masked and we start. Allow most of the day, and we will tell you if anything changes.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
How to prepare
- Ensure the area is dry
- Tell us if there are stairs or a lift
- Tell us about any previous repairs or coatings
Get a quote
Send us a picture of the damage and a wider shot of the whole item, with your NG33 postcode, and we’ll come back with a fixed quote.
Read more
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
South Witham and the surrounding area
South Witham is about 8 miles north-east of Oakham, in Lincolnshire. Clients in South Witham get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. We work in 732 places in Lincolnshire. We work right across the region, from South Witham to Birmingham (about 57 miles away).
Our visits in NG33 work the same way as everywhere else we cover. Streets in the area include High Street, Water Lane and Church Street, all of which we cover. We also travel to Thistleton (1 mile south-west), North Witham (2 miles north), Gunby (2 miles north-west), Stainby (2 miles north-west) and Sewstern (3 miles north-west). We also work in nearby towns such as Grantham (10 miles north), Stamford (10 miles south-east), Bourne (10 miles east), Austerby (11 miles east), Market Deeping (14 miles south-east) and Spittlegate (10 miles north).
Landmarks near South Witham
We visit homes around The Angel Inn, South Witham Academy and Church of St John the Baptist. Further afield, we also cover the area around Mount Alstoe (5 miles south-west). For a walk, there is Cribb's Meadow.
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Keeping it looking good
So the finish stays in good condition:
- Clean with a soft cloth and mild detergent
- Don’t let dyes or oils sit on the finish
- Dry the bath after use to stop limescale
- Repair dripping taps early
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
