Lincolnshire · England
Bath re-enamelling & resurfacing in Stainby, Lincolnshire
Bath re-enamelling in and around Stainby: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Lots of chips and rust spots
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why Stainby customers choose us
- We leave the room as we found it
- Everything repaired in place
- A fixed quote before you book
- Most jobs done in one visit
Take a look at our prices page and resurfacing vs replacement cost guide.
Bath re-enamelling in Stainby, done in place
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. Whether it’s staining under the taps and around the waste and an original cast iron bath that needs restoring, we can help, whatever the material.
You are covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Stainby (NG33)
- County
- Lincolnshire
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Also near Stainby
Other services in Stainby
Covering Stainby
Stainby is about 8 miles south of Grantham, in Lincolnshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Stainby is one of 732 towns and villages in Lincolnshire we cover. You can also see our page for Birmingham, about 57 miles away.
Our visits in NG33 are booked in the same way as anywhere else. That includes homes on Middle Street, Water Lane and Main Road. Close by, we cover Gunby (1 mile south), North Witham (1 mile south-east), Sewstern (1 mile south-west), Buckminster (2 miles west) and South Witham (2 miles south-east). Within a short drive, we also cover Grantham (8 miles north), Stamford (12 miles south-east), Bourne (12 miles east), Austerby (12 miles east), Spittlegate (7 miles north) and Gonerby Hill Foot (9 miles north).
Landmarks near Stainby
Typical jobs here are in homes near Church of St Peter and the streets around them. Other landmarks nearby include Garthorpe Motte (4.7 miles west). Open spaces near Stainby include Cribb's Meadow.
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
What affects the price in Stainby
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- How hard the colour is to match
- Any earlier repairs that need removing first
- What the surface is made of
- How much damage there is
A repair is priced on what needs doing, not where you live. You’ll see the full price before booking, with nothing added on the day.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what to send:
- Whether it’s been repaired or coated before
- A picture taken from further back
- Your postcode, so we can check dates
- One sharp close-up of the damage
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price without visiting.
Your questions about bath re-enamelling in Stainby
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Is the work guaranteed?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Can you re-enamel a roll-top bath?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room protected and ventilated.
Can I get a quote without a visit?
Generally, yes. Clear pictures let us give you a fixed price without visiting.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Fix dripping taps quickly
- Get any chip repaired quickly
- Do not let dyes or oils sit on the finish
- Respect the curing time we give you
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Do you need bath re-enamelling in Stainby?
Frequently the bath has just had decades of use, and only the surface is worn. The body of the bath is usually perfectly sound.
You may need us if you’ve spotted:
- Brown or grey marks that do not clean off
- Lots of chips and rust spots
- Enamel that’s lost its shine and feels rough
- A peeling or bubbling previous coating
Questions to ask before booking
- How soon you can use it again
- Who turns up on the day
- How your room will be protected
- How to look after the finish
For landlords and businesses
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
The process
We turn up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take a full day, and we leave the room as we found it.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Have a window or extractor fan available
- Mention if the room is upstairs or in a flat
Ask for a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and you are under no obligation.
Read more
When we would advise against a repair
Before booking, it’s worth knowing the limits:
- An acrylic bath that flexes badly underfoot
- Steel that has corroded right through
- Plumbing leaks, which need a plumber
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
