North Yorkshire · England
Bath Re-enamelling for Speeton homes
Problem with your bath in Speeton? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- A coating lifting around the plughole
What we’re called out for in Speeton
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Common reasons people in Speeton contact us are:
- Wear marks under the taps
- A bath that stays dull however much you clean it
- Stains that won’t shift
- Lots of chips and rust spots
Before booking anyone
- What prep work is covered
- Who turns up on the day
- Is the price fixed, and does it include VAT?
- Whether there are any call-out or travel charges
Bath re-enamelling at your home in Speeton
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We’re often asked to fix a bath in a colour that no longer suits and lots of chips and rust spots, across acrylic baths, basins & shower trays and pressed steel baths.
Big or small, it’s backed by a one-year guarantee in Speeton and across North Yorkshire.
- Location
- Speeton (YO14)
- Area hub
- North Yorkshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Speeton and nearby
Speeton is about 5 miles north of Bridlington, in North Yorkshire. Whether you’re in the middle of Speeton or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Speeton is one of 626 towns and villages in North Yorkshire we cover. We work right across the region, from Speeton to Leeds (58 miles away).
All of YO14 is covered. If you are just outside Speeton, we cover Reighton Sands (1 mile north-west), Reighton (1 mile north-west), Hunmanby Gap (2 miles north-west), Grindale (2 miles south-west) and Buckton (2 miles south-east). Larger places within reach include Scarborough (11 miles north-west), Falsgrave (11 miles north-west), Filey (4 miles north-west), Northstead (12 miles north-west), Newby (12 miles north-west) and Hunmanby (4 miles north-west).
Around Speeton
Typical jobs here are in homes near Church of St Leonard. The closest station to Speeton is Bempton station, roughly 3.1 miles south-east of the centre. Other landmarks nearby include Avenue Hospital (4.4 miles south). The countryside around Speeton includes Bempton Cliffs RSPB reserve.
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Speeton. What changes the price is:
- Unusual colours or finishes
- What kind of damage it is
- The material and finish
- The size and number of damaged areas
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send photos for a quote
Phone pictures are fine. Make sure they show:
- The material, if you know it
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- A photo taken from further back
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Repairing versus replacing in Speeton
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why choose Surface Doctor in Speeton
- Colour-matched on site
- Most jobs done in one visit
- No extra charge for your area
- Honest advice, even when it means no job
Take a look at our prices page and bath cost comparison.
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Get any chip repaired quickly
- Don’t leave bottles, razors or sponges standing on the surface
- Wipe the bath dry after use in hard water areas
- Don’t use the bath until it has fully cured
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale can’t build up.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
How the visit works
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes a full day, and we finish with a tidy-up and a look at the finished work together.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the following day.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Point us to the nearest place to park
- Make sure the room can be ventilated
Get a quote
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Advice
What a repair can’t fix
A repair is not always the answer, and we’ll tell you before we start. We cannot fix:
- Anything hidden under an old coating, until we remove it
- Steel that has corroded right through
- A cast iron or steel bath that is cracked right through
Send us photos and we will tell you honestly before you book.
Materials we repair
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
FAQs for Speeton
Do you resurface freestanding baths?
Yes. We can do the inside and outside.
Do you charge for travel?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
Which areas do you work in?
Everywhere in the UK, Speeton included. Travel is included in the price.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
Places near Speeton
What else we do in Speeton
About our accreditations · Every repair comes with a one-year guarantee.
