Staffordshire · England
Bath Re-enamelling in Spot Acre
Bath re-enamelling for Spot Acre, without a refit. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A roll-top that’s seen better days
Repairing versus replacing in Spot Acre
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Prices start from £350. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.
What you get with us
- No need to remove anything
- We come to you, anywhere in the UK
- One visit for most repairs
- One price list for the entire UK
Read our prices page and bath cost comparison.
Bath re-enamelling at your home in Spot Acre
When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. There’s no removal, plumbing or tiling involved. We are frequently asked to fix a roll-top that’s seen better days and an old resurfacing that’s failing, on pressed steel baths, basins & shower trays and acrylic baths.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll sort it.
- Location
- Spot Acre (ST15)
- County
- Staffordshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Your questions about bath re-enamelling in Spot Acre
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Is there any odour?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Do you cover the entire of Staffordshire?
Everywhere in the UK, Spot Acre included. Travel is included in the price.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Spot Acre.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
Our work in Spot Acre
Spot Acre is about 3 miles north-east of Stone, in Staffordshire. From the centre of Spot Acre to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 512 towns and villages in Staffordshire. Our jobs stretch from Spot Acre to Birmingham (about 33 miles away).
All of ST15 is covered, from the main roads to the quietest streets. Close by, we cover Mossgate (1 mile east), Mosslane (1 mile south-east), Fulford (1 mile north-east), Hilderstone (1 mile south) and Stallington (1 mile north). Within a short drive, we also cover Stafford (9 miles south), Newcastle-under-Lyme (9 miles north-west), Longton (4 miles north-west), Rugeley (14 miles south-east), Stone (3 miles south-west) and Leek (12 miles north).
Landmarks near Spot Acre
Locally, our jobs take us to homes close to Fulford Primary School, Spotgate Inn and Church of St Nicholas. For rail, the closest station is Blythe Bridge station, roughly 2.7 miles north of the centre. Well-known places in the area include Beswick Museum (3 miles north) and Cheadle Hospital (5.4 miles north-east). Green spaces nearby include Hem Heath Woods.
What we are called out for in Spot Acre
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
People normally call us when they notice one of these:
- A bath that stays dull however much you clean it
- A coloured bath you want in white
- Several chips and rust patches
- Stains that won’t shift
Before booking anyone
- How your room will be protected
- What aftercare is recommended
- How long it needs to cure
- Whether cleaning and preparation are in the price
When we’d advise against a repair
We would rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
What affects the price in Spot Acre
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- What the surface is made of
- Previous DIY repairs that have to come out
- Access to the area
- How hard the colour is to match
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Quotes from your pictures
Most quotes are done from pictures alone. To help us price it:
- What it’s made of, if you know
- Natural light rather than flash
- One picture of the whole bath
- Any earlier repairs or coatings
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Nearby places to Spot Acre
Also in Spot Acre
Work for landlords and builders
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
How the visit works
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes the best part of a day, and we finish by cleaning up and talking you through the result.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the following day.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Avoid using the area for a few hours before we arrive
- Keep children and pets away from the room on the day
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote without visiting.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
