Highland · Scotland
Bath Re-enamelling for Srath Carran homes
Damaged bath in Srath Carran? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A coloured bath you want in white
Bath re-enamelling in Srath Carran, done in place
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We are often asked to fix brown or grey marks that don’t clean off and an old resurfacing that’s failing, on Victorian roll-tops, pressed steel baths and acrylic baths.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Location
- Srath Carran (IV54)
- County
- Highland
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What bath re-enamelling costs
Prices start from £350. We charge the same across the UK, including Srath Carran. What changes the price is:
- How hard the colour is to match
- Whether old repairs or coatings need taking off
- How much damage there is
- The type of damage
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
A couple of clear pictures is all it takes. It helps if you send:
- Something in shot to show the size
- One sharp close-up of the damage
- Details of any past repairs
- Your postcode, so we can check dates
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Towns and villages near Srath Carran
More services for Srath Carran
How it works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a full day, and we finish by cleaning up and talking you through the result.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Point us to the nearest place to park
- Let us know about parking or access
Get a quote
For a price in Srath Carran, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Read more
Signs you need bath re-enamelling in Srath Carran
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
These are the problems we’re asked about most:
- Thin, worn enamel in places
- Stains that won’t shift
- A period or roll-top bath worth keeping
- A bath in a colour that no longer suits
What your quote should include
- How changes to the job are handled
- How the room is protected while they work
- How to look after the finish
- How long the guarantee is and what it covers
Repair or replace: which is better?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Our prices are the same across the UK, with no extra for Srath Carran. The job itself decides the price: the material, the amount of damage and how many items.
Why Srath Carran customers choose us
- Colour mixed on the day to match
- Straight answers about what a repair can do
- Rooms protected and left tidy
- Work done at your home or business
Take a look at our pricing or resurfacing vs replacement cost guide.
Common questions in Srath Carran
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
When can you do it?
That depends on our diary for your area. We will offer you dates when we send your quote.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Is there any odour?
There may be a mild smell during the work that clears as it cures.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
What do you need from me?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Landlords, agents and businesses in Srath Carran
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Covering Srath Carran
Srath Carran (Gaelic: Strathcarron) is in Highland. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Srath Carran is one of 253 towns and villages in Highland where we work.
Here we cover the IV54 postcode area. If you are just outside Srath Carran, we cover Achintee (1 mile south), Lochcarron (2 miles south-west), Balnacra (3 miles north-east), Strome Ferry (7 miles south-west) and Torridon (9 miles north). If you’re somewhere remote, ring us first and we’ll plan the trip.
Near you in Srath Carran
Around Srath Carran, we work in homes near Kirkton in Meikle Strath School. There’s a railway station in Srath Carran itself: Strathcarron station. For a walk, there is Loch Dùghaill.
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- An acrylic bath that flexes badly underfoot
- Problems we can’t see until an old finish comes off
- Steel that has corroded right through
Send us photos and we will tell you honestly before booking.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Clean with a soft cloth and mild detergent
- Wash away dyes and oils after use
- Keep toiletries on a shelf rather than in the bath
- A dripping tap should be fixed promptly
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
About our accreditations · Every repair comes with a one-year guarantee.
