Plymouth · England

Bath Re-enamelling in St Budeaux

Fixed-price bath re-enamelling in St Budeaux and the surrounding area, typically in one visit and guaranteed for a year.

  • Resurfacing from £350
  • Several chips and rust patches
  • A bath in a colour that no longer suits
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in St Budeaux

Bath re-enamelling in St Budeaux without replacing anything

The bath stays where it is, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, and can be used again the following day. If you’re dealing with a peeling or bubbling previous coating and a coloured bath you want in white, we can usually put it right.

Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.

Location
St Budeaux (PL5, PL2)
Area hub
Plymouth
Guarantee
12 months on all our work
Price
From £350. Free, fixed price from pictures
Phone
0345 017 0787
Last updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

When a repair is not the answer

Not everything can be repaired, and we’d rather say so up front. Repairs won’t solve:

  • A metal bath with a through crack
  • Leaks from fittings rather than the bath
  • An acrylic bath that flexes badly underfoot

If in doubt, send pictures and we’ll say what we think.

What we work on

  • Acrylic baths
  • Pressed steel baths
  • Basins & shower trays
  • Cast iron baths
  • Victorian roll-tops

Why repair rather than replace?

A replacement often means several trades over several days. Re-enamelling is one technician, usually one day, with the bath back in use the day after. Prices start from £350. The price reflects the work involved, not your postcode. The full price is agreed before booking, with nothing added on the day.

Why book with us

  • Same prices wherever you are
  • Nothing taken out or refitted
  • One visit for most repairs
  • Fixed prices from your pictures

See our prices page or guide to resurfacing and replacement costs.

How it works

From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes the best part of a day, and we finish with a tidy-up and a look at the finished work together.

  1. The room is masked, protected and ventilated.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. The surface is prepared and a bonding primer applied.
  4. We spray several coats of new enamel finish.
  5. The bath is left to cure and can generally be used the following day.

Getting ready for the visit

  • Make sure the area is dry
  • Mention if the room is upstairs or in a flat
  • Keep children and pets away from the room on the day

How to get a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote the same day in most cases.

Get a free quote

Related advice

Can I fix it myself?

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

What bath re-enamelling costs

Prices start from £350. You will not pay by the hour. The price depends on:

  • How easy the damage is to reach
  • Any earlier repairs that need removing first
  • The colour and finish to match
  • The material and finish

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Send photos for a quote

It only takes a minute to photograph the damage. Please include:

  • Good light, ideally daylight, without flash glare
  • Something in shot to show the size
  • Any earlier repairs or coatings
  • Your postcode, so we can check dates

Upload a photo of the damage and one of the entire item, and tell us you are in St Budeaux, and we’ll reply with a fixed price.

St Budeaux and the surrounding area

St Budeaux is about 2 miles north-west of Stonehouse, in Plymouth. Across the PL5 area, we carry out the work at your property. We work in all 59 towns and villages across Plymouth, from the larger towns to small villages.

Our technicians cover all of the PL5 and PL2 postcode area. That includes homes on Row Lane, York Road and Moor Lane. Other places close to St Budeaux include King's Tamerton (1 mile north-east), Honicknowle (1 mile north-east), Ernesettle (1 mile north), Whitleigh (2 miles north-east) and Tamerton Foliot (2 miles north-east). Within a short drive, we also cover Plymouth (3 miles east), Mannamead (3 miles south-east), Lipson (3 miles south-east), Mutley (3 miles south-east), Hartley (3 miles east) and Compton (3 miles east).

Near you in St Budeaux

Our clients here include homes close to St Boniface Church, Central Park and Victoria Road Primary. You will also find The Trelawney Arms (less than half a mile south), Marine Academy Plymouth (0.5 miles north-east), Marine Academy Detachment (0.5 miles north-east) and St Budeaux Library (under half a mile west). There is a railway station in St Budeaux itself: St Budeaux Victoria Road station. Further afield, we also cover the area around Plymouth General Hospital (2 miles south) and Armada Centre (2.7 miles south-east).

Map of St Budeaux © OpenStreetMap contributors

Looking after it afterwards

Much of the damage we repair could have been avoided. A few tips:

  • Leave the bath for the full curing time before using it
  • Keep toiletries on a shelf rather than in the bath
  • Wash away dyes and oils after use
  • A quick wipe after use keeps limescale away

A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.

Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.

Repairs by material

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Pressed steel

Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.

Signs you need bath re-enamelling in St Budeaux

By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.

Typical reasons for a call-out include:

  • Worn patches where water runs and sits
  • Chips and rust in more than one place
  • A bath in a colour that no longer suits
  • A coating lifting around the plughole

Comparing quotes

  • How soon you can use it again
  • What the guarantee covers, and for how long
  • How to care for the finish
  • How changes to the job are handled

10 questions to ask before booking

St Budeaux: your questions answered

Do you need to take the bath out?

No, it stays where it is. We work on the bath in place, with the room masked and ventilated.

Will it make a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

How durable is a resurfaced bath?

It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.

Can you make a coloured bath white?

Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.

Does re-enamelling smell?

A little, during the work. We set up ventilation and the smell fades as it cures.

Can you repair several things at once?

Yes, and it’s often cheaper. Just add the extra items to your photos and you will get one combined price.

Is my repair covered?

All our work carries our one-year guarantee. Ask us what it covers when you get your quote.

Are there extra charges for St Budeaux?

There is no separate call-out charge. The fixed quote covers the visit and the work.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.