Norfolk · England
Bath Re-enamelling in St John's Fen End
Full bath re-enamelling and resurfacing for homes and businesses in St John's Fen End and across Norfolk. Send pictures for a free, fixed quote.
- Resurfacing from £350
- A coloured bath you want in white
- A dull, rough surface that won’t come clean
How we price bath re-enamelling
Prices start from £350. A fixed quote means you know the cost before you book. We look at:
- The type of damage
- The size and number of damaged areas
- What the surface is made of
- Whether we combine several jobs
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send photos for a quote
You can normally get a fixed quote without us visiting. To help us price it:
- A coin beside the damage so we can judge size
- Natural light rather than flash
- Your postcode, so we can check dates
- Any details about the material
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed price, not an estimate.
Bath re-enamelling in St John's Fen End, done in place
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Whether it’s worn patches where water runs and sits and an old resurfacing that’s failing, we can usually put it right, whatever the material.
Every job is backed for twelve months in St John's Fen End and everywhere else. We return to put right any problem with the work.
- Area
- St John's Fen End (PE14)
- County
- Norfolk
- Cover
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Damage hidden under a previous coating, until it’s stripped back
- A metal bath with a through crack
- An acrylic bath that flexes badly underfoot
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in St John's Fen End
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
Towns and villages near St John's Fen End
Also in St John's Fen End
For landlords and businesses
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll arrange it.
Where we work around St John's Fen End
St John's Fen End is about 4 miles east of Wisbech, in Norfolk. Wherever you are in the PE14 postcode area, we carry out the work at your property. We work in all 797 towns and villages in Norfolk.
All of PE14 is covered, from the main roads to the quietest streets. You will find streets such as Smeeth Road, Hunter's Drove and Bonnetts Lane, all of which we cover. Neighbouring places we cover include Tilney Fen End (1 mile east), Marshland St James (1 mile south-west), Walton Highway (3 miles north-west), Emneth (3 miles south-west) and Boyces Bridge (4 miles south-west). Further out, we also cover King's Lynn (9 miles north-east), Downham Market (7 miles south-east), Fairstead (9 miles north-east), West Lynn (8 miles north-east), North Lynn (9 miles north-east) and Dersingham (15 miles north-east).
What’s near St John's Fen End
We visit homes around Marshland St James Primary and Nursery School and the streets around them. St John's Fen End’s nearest station is Watlington station, roughly 4.8 miles east. A little further out are North Cambridgeshire Hospital (4.4 miles west) and Wisbech Castle (4.5 miles west).
Repair or replace: which is better?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. The price reflects the work involved, not where you live. The full price is agreed before you book.
Why us?
- Straight answers about what a repair can do
- We come to you, anywhere in the UK
- Fixed prices from your pictures
- One visit for most repairs
Take a look at our pricing and resurfacing vs replacement cost guide.
What we do, step by step
Here’s how a visit usually runs: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Allow the best part of a day from start to finish. Before we go, we will explain how long to leave it and how to care for it.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the following day.
Getting ready for the visit
- Let us know about parking or access
- Let us know if it has been repaired before
- Ensure the area is dry
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote.
Advice
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
St John's Fen End: your questions answered
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Do the materials smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
How much does bath re-enamelling cost in St John's Fen End?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.
What if the damage is worse than the photos show?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Can I get a quote without a visit?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
Is there a call-out fee?
There is no separate call-out charge. Your fixed quote includes everything.
Can you fix a peeling bath coating?
Generally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
Aftercare tips
Once the work has cured, treat it gently:
- Keep suction mats out of the bath
- Keep toiletries on a shelf rather than in the bath
- Fix dripping taps quickly
- Do not leave a chip unrepaired
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
What we are called out for in St John's Fen End
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
People usually call us when they notice one of these:
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
- Chips and rust in more than one place
- Thin, worn enamel in places
Comparing quotes
- What happens if they find more damage
- What preparation is included
- When it can be used again
- A fixed quote, and whether VAT is included
About our accreditations · Every repair comes with a one-year guarantee.
