Surrey · England
Bath re-enamelling & resurfacing in St John's, Surrey
Damaged bath in St John's? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Stains that won’t shift
- Several chips and rust patches
Where we work around St John's
St John's is about 1 mile west of Woking, in Surrey. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. St John's is one of 395 towns and villages in Surrey we cover. Our jobs stretch from St John's to London (25 miles away).
Postcode districts we cover here: GU21 and GU22. We regularly work on streets such as Pond Road, Copse Road and Raglan Road. St John's is on the A324, so it’s easy for us to reach. We also cover the places around St John's: Goldsworth Park (1 mile north-east), Woking (1 mile east), Westfield (2 miles south-east), Horsell (2 miles north-east) and Mimbridge (2 miles north). We also work in nearby towns such as Guildford (5 miles south), Camberley (6 miles west), Epsom (14 miles east), Farnham (11 miles south-west), Ewell (15 miles east) and Egham (8 miles north).
Landmarks near St John's
Around St John's, we work in homes near Royal Oak pub, Brookwood Lye and The Winston Churchill School A Specialist Sports College and the streets around them. Other local landmarks include The Oaktree School (0.6 miles west), St John's Church (under half a mile south-east) and Hoe Valley School (1.2 miles south-east). For rail, the closest station is Woking station, about 1.6 miles east. A little further out are Brookwood Hospital (1 mile west) and The Peacocks (1.6 miles east). Open spaces near St John's include Brookwood Lye.
Bath re-enamelling in St John's, done in place
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. Whether it’s an original cast iron bath that needs restoring and lots of chips and rust spots, we can help.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Where
- St John's (GU21, GU22)
- County
- Surrey
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Prices and what affects them
Resurfacing from £350. You won’t pay by the hour. The price is based on:
- How many areas need work
- What the surface is made of
- How many items we do on one visit
- Unusual colours or finishes
Set against the cost of replacement, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send photos for a quote
Almost every job we do is priced from pictures. This is what we need:
- Where you are, by postcode
- A coin beside the damage so we can judge size
- One picture of the entire bath
- The material, if you know it
For a price in St John's, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
For landlords and businesses
We work for landlords, letting agents and housing providers in St John's as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Looking after it afterwards
Once the work has cured, treat it gently:
- A dripping tap should be fixed promptly
- Leave the bath for the full curing time before using it
- Wipe the bath dry after use in hard water areas
- Keep toiletries on a shelf rather than in the bath
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What happens on the day
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for the best part of a day from start to finish. Before we go, we’ll explain when it can be used and how to look after it.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Point us to the nearest place to park
- Tell us about parking, stairs or access
- Tell us about any previous repairs or coatings
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Related advice
Should I try a DIY kit first?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
Towns and villages near St John's
Also in St John's
St John's questions
Is my repair covered?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
How much does bath re-enamelling cost in St John's?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
Are there extra charges for St John's?
We do not add a call-out fee. The fixed quote covers the visit and the work.
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Honest limits
It helps to know what we can’t do too:
- Leaks from fittings rather than the bath
- A metal bath with a through crack
- Problems we can’t see until an old finish comes off
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
Common problems we fix in St John's
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Common reasons people in St John's contact us are:
- Stains that won’t shift
- A coating lifting around the plughole
- Lots of chips and rust spots
- A bath in a colour that no longer suits
What your quote should include
- What happens if they find more damage
- Whether the colour is mixed to match
- How soon you can use it again
- How the room is protected while they work
About our accreditations · Every repair comes with a one-year guarantee.
