Essex · England
Bath re-enamelling & resurfacing in St Lawrence Bay, Essex
Bath re-enamelling in St Lawrence Bay without the cost of replacing. Get a fixed quote from your photos, then book a visit.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
Why repair rather than replace?
A replacement often means several trades over several days. Resurfacing takes one technician and normally a day, with the bath back in use the day after. Resurfacing from £350, with every job priced individually. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Why choose Surface Doctor in St Lawrence Bay
- One price list for the entire UK
- Everything repaired in place
- We’ll tell you if it’s not worth repairing
- Colour-matched on site
Take a look at our full price list and resurfacing vs replacement cost guide.
Bath re-enamelling in St Lawrence Bay without replacing anything
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. We’re frequently asked to fix a roll-top that’s seen better days and thin, worn enamel in places, in basins & shower trays, pressed steel baths and acrylic baths.
Big or small, you get the same one-year guarantee in St Lawrence Bay and across Essex.
- Area
- St Lawrence Bay (CM0)
- County
- Essex
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Resurfacing from £350. You’ll know the full cost before you book. We look at:
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- Previous DIY repairs that have to come out
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Getting a price from pictures
You can take the pictures on your phone. Just make sure we can see:
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
- One picture of the whole bath
- A clear, close picture of the problem area
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Questions from St Lawrence Bay
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Which areas do you work in?
Everywhere in the UK, St Lawrence Bay included. Travel is included in the price.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Can you price it without visiting?
Nearly always. If pictures do not show enough, we’ll ask for another angle.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Our work in St Lawrence Bay
St Lawrence Bay is about 6 miles east of Heybridge, in Essex. Anywhere in CM0, a technician comes to you. St Lawrence Bay is one of 644 towns and villages in Essex we cover. Our nearest city page is London, about 42 miles away.
Jobs in CM0 work the same way as everywhere else we cover. Streets in the area include Main Road, Tinnocks Lane and Moorhen Avenue, all of which we cover. We also travel to Ramsey Island (1 mile south-east), Bradwell Wick (2 miles east), Mill End (3 miles east), Tollesbury (3 miles north) and Bradwell Waterside (3 miles east). We also work in nearby towns such as Colchester (12 miles north), Chelmsford (14 miles west), Clacton-on-Sea (15 miles east), Maldon (6 miles west), Rayleigh (13 miles south-west) and Witham (10 miles north-west).
Near you in St Lawrence Bay
Locally, our jobs take us to homes close to St Lawrence Church Centre and the streets around them. St Lawrence Bay’s nearest station is Southminster station, about 4.1 miles south of the centre. Nearby you’ll also find Maldon & District Agricultural & Domestic Museum (3.4 miles north-west). Green spaces nearby include Tollesbury Wick.
How to care for the repair
To keep it looking its best:
- A dripping tap should be fixed promptly
- Stick to gentle, non-abrasive cleaners
- Store bottles off the bath
- Wash away dyes and oils after use
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
How it works
Here’s how a visit usually runs: we arrive on time, sheet and mask the area around the job, do the job and clear up. Plan for most of the day. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Point us to the nearest place to park
- Mention if the room is upstairs or in a flat
Get a quote
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Read more
Nearby places to St Lawrence Bay
Also in St Lawrence Bay
Common problems we fix in St Lawrence Bay
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Keep an eye out for these signs:
- Stains that won’t shift
- A bath in a colour that no longer suits
- An old resurfacing that’s failing
- An original cast iron bath that needs restoring
What your quote should include
- Whether a trained technician does the job
- Whether the price covers travel
- Is the price fixed, and does it include VAT?
- How your room will be protected
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Landlords, agents and businesses in St Lawrence Bay
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
About our accreditations · Every repair comes with a one-year guarantee.
