Essex · England

Bath re-enamelling & resurfacing in St Vincent's Hamlet, Essex

Full bath re-enamelling and resurfacing at your home in St Vincent's Hamlet, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • A period or roll-top bath worth keeping
  • A dull, rough surface that won’t come clean
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near St Vincent's Hamlet

Bath re-enamelling in St Vincent's Hamlet, done in place

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We work on cast iron baths, acrylic baths and basins & shower trays, and the jobs we see most are a bath that stays dull however much you clean it and a bath in a colour that no longer suits.

You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.

Before and after: an old basin refinished to bright white
Area
St Vincent's Hamlet (CM14)
Region
Essex
Cover
12 months on all our work
Quote
From £350. Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026

When we would advise against a repair

A repair isn’t right for every job, for example:

  • Plumbing leaks, which need a plumber
  • An acrylic bath that flexes badly underfoot
  • Damage hidden under a previous coating, until it’s stripped back

Not sure? Send pictures and we will give you a straight answer.

Materials we repair

  • Victorian roll-tops
  • Basins & shower trays
  • Acrylic baths
  • Cast iron baths
  • Pressed steel baths

Where we work around St Vincent's Hamlet

St Vincent's Hamlet is about 3 miles west of Brentwood, in Essex. Whether you are in the middle of St Vincent's Hamlet or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. St Vincent's Hamlet is one of 644 places in Essex we cover. We work right across the region, from St Vincent's Hamlet to London (17 miles away).

Our visits in CM14 work the same way as everywhere else we cover. From Wrightsbridge Road and Weald Road or a nearby road, a technician can come to you. If you are just outside St Vincent's Hamlet, we cover Noak Hill (1 mile south-west), Waterhales (1 mile north-west), Harold Hill (1 mile south), Coxtie Green (1 mile north-east) and Horseman Side (1 mile north). We also work in nearby towns such as Chelmsford (13 miles north-east), Basildon (10 miles east), Harlow (11 miles north-west), Brentwood (3 miles east), Billericay (8 miles east) and Loughton (8 miles west).

Local landmarks in St Vincent's Hamlet

In St Vincent's Hamlet, that means homes near Dagnam Park, Church of St Thomas and Drapers' Academy, among other places. You will also find King's Wood School (1.1 miles south) and Drapers' Maylands Primary School (1.1 miles south). St Vincent's Hamlet’s nearest station is Harold Wood station, about 2.3 miles south. Well-known places in the area include The Mercury Mall (3.9 miles south-west) and Harold Wood Hospital (2.4 miles south). For a walk, there is Bedfords Park.

Map of St Vincent's Hamlet © OpenStreetMap contributors

Common questions in St Vincent's Hamlet

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

How do I get a price for bath re-enamelling in St Vincent's Hamlet?

Resurfacing from £350. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.

Can you price it without visiting?

Nearly always. We only ask to see it in person if the pictures can’t show what we need.

Can you redo someone else’s repair?

Most of the time. Let us know what was used before.

Do the materials smell?

There can be some smell while we work. It fades as everything cures.

Someone resurfaced my bath and it’s peeling. Can you help?

Yes. Stripping the old coating adds time, so it’s reflected in the quote.

Is it safe with children and pets around?

On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.

How long will the bath be out of use?

Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.

Repairs by material

Acrylic

We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.

Pressed steel

Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.

For landlords and businesses

We carry out planned and one-off repairs for housing associations and facilities teams in Essex and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

How we price bath re-enamelling

Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:

  • The size and number of damaged areas
  • How hard the colour is to match
  • The material and finish
  • How easy the damage is to reach

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.

Quotes from your pictures

Two or three clear photos are generally enough. It helps if you send:

  • Where you are, by postcode
  • A close-up of the damage, in focus
  • A coin beside the damage so we can judge size
  • What it’s made of, if you know

Most clients in St Vincent's Hamlet get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

Looking after it afterwards

Aftercare is simple, and it makes a real difference:

  • Stick to gentle, non-abrasive cleaners
  • A dripping tap should be fixed promptly
  • Wipe the bath dry after use in hard water areas
  • Leave the bath for the full curing time before using it

A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.

On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.

Should you replace it?

Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

What you get with us

  • A fixed quote before booking
  • Every repair guaranteed for a year
  • Same prices wherever you are
  • We come to you, anywhere in the UK

See our pricing or resurfacing vs replacement cost guide.

DIY kit or professional repair?

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

The process

A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and clear up. Allow the best part of a day from start to finish. Before we go, we’ll explain how long to leave it and how to look after it.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. The masking comes off, we tidy up and tell you when it can be used.

How to prepare

  • Have somewhere for us to park nearby if possible
  • Tell us about any previous repairs or coatings
  • Mention if the room is upstairs or in a flat

Getting a price

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.

Get a fixed price

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.