Essex · England
Bath Re-enamelling in South Weald
Fixed-price bath re-enamelling in South Weald and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Lots of chips and rust spots
Keeping it looking good
It’s all simple stuff:
- Fix dripping taps quickly
- A quick wipe after use keeps limescale away
- Keep suction mats out of the bath
- Do not leave bottles, razors or sponges standing on the surface
Dry the bath after use if possible, and rinse off any bath products.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
How we handle bath re-enamelling in South Weald
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the whole bath is tired rather than one spot. Common call-outs are for thin, worn enamel in places and lots of chips and rust spots, across acrylic baths, pressed steel baths and basins & shower trays.
Every repair comes with a one-year guarantee, wherever you are in Essex.
- Location
- South Weald (CM14)
- Region
- Essex
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Honest limits
We’ll always be straight with you, so here’s what a repair won’t do:
- A cast iron or steel bath that’s cracked right through
- Plumbing leaks, which need a plumber
- Problems we cannot see until an old finish comes off
Not sure? Send photos and we will give you a straight answer.
What we work on
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
What bath re-enamelling costs
Resurfacing from £350. You won’t pay by the hour. The price is based on:
- Any earlier repairs that need removing first
- Access to the area
- The colour and finish to match
- The material and finish
The price reflects the work involved, not where you live. You will see the full price before booking.
How to get a fixed price
Photographing the damage takes a minute. Try to send:
- Details of any past repairs
- A coin or ruler next to the damage for scale
- Natural light rather than flash
- A wider photo showing the whole bath
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote.
Why repair rather than replace?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before you book.
Why South Weald customers choose us
- No need to remove anything
- Work done at your home or business
- Colour mixed on the day to match
- Same prices wherever you are
Read our pricing and bath cost comparison.
South Weald questions
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from pictures. You will get a fixed figure before booking.
Do you come to South Weald?
Yes. We work across the UK and travel to South Weald and the rest of Essex. Send us pictures for a fixed quote, or call 0345 017 0787.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
What happens once I’ve sent pictures?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Towns and villages near South Weald
More services for South Weald
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
How it works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which typically takes a full day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Keep children and pets away from the room on the day
- Mention any parking restrictions or tricky access
- Have a window or extractor fan available
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Advice
When to call us in South Weald
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Keep an eye out for any of the following:
- An old resurfacing that is failing
- A dull, rough surface that will not come clean
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
What your quote should include
- How soon you can use it again
- If travel is included in the price
- What prep work is covered
- Whether a trained technician does the job
Where we work around South Weald
South Weald is about 2 miles west of Brentwood, in Essex. We visit homes and businesses in South Weald and the surrounding area, so nothing has to leave your home. South Weald is one of 644 places in Essex where we work. Our jobs stretch from South Weald to London (18 miles away).
Here we cover the CM14 postcode area. Streets in the area include Weald Road and Wigley Bush Lane, and we cover them all. We also cover the places around South Weald: Brook Street (1 mile south), Coxtie Green (1 mile north), Pilgrims Hatch (1 mile north-east), St Vincent's Hamlet (1 mile west) and Noak Hill (2 miles west). We also work in nearby towns such as Chelmsford (12 miles north-east), Basildon (9 miles south-east), Harlow (12 miles north-west), Canvey Island (15 miles south-east), Billericay (7 miles east) and Rayleigh (15 miles east).
Local landmarks in South Weald
Our clients here include homes close to Church of St Peter, Weald Country Park and Tower Arms, among other places. Other local landmarks include Becket Keys Church of England School (1.4 miles east), Sawyers Hall College (1.4 miles east) and Holly Trees Primary School (1.2 miles south-east). For rail, the closest station is Brentwood station, roughly 1.5 miles south-east. A little further out are Spire Hartswood Hospital (1.8 miles south-east) and Upminster Tithe Barn Museum of Nostalgia (3.8 miles south). For a walk, there’s Warley Place.
About our accreditations · Every repair comes with a one-year guarantee.
