Derbyshire · England
Bath re-enamelling & resurfacing in Stanton, Derbyshire
Damaged bath in Stanton? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- A dull, rough surface that will not come clean
Covering Stanton
Stanton is about 7 miles east of Cheadle, in Derbyshire. Whether you are in the middle of Stanton or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover 532 places in Derbyshire. Our nearest city page is Manchester, about 36 miles away.
Every address in DE6 is covered. Streets in the area include Bankside, Sladehollow Lane and Sallyfield Lane. Other places close to Stanton include Wootton (1 mile south-west), Calton (3 miles north-west), Ilam (3 miles north), Hoften's Cross (3 miles west) and Cauldon (3 miles north-west). We also work in nearby towns such as Belper (14 miles east), Matlock (14 miles north-east), Ashbourne (4 miles east), Hilton (13 miles south-east), Bakewell (15 miles north-east) and Darley Dale (14 miles north-east).
Near you in Stanton
Locally, our jobs take us to homes close to St Mary's Church and the streets around them. Nearby you will also find Alton Castle (3.9 miles south-west) and St Oswalds Hospital (3.2 miles east). Green spaces nearby include Thorpe Cloud and Thorswood.
How we handle bath re-enamelling in Stanton
When a bath is structurally fine but worn out on the surface, re-enamelling is generally the most cost-effective option. There is no removal, plumbing or tiling involved. Typical jobs include an old resurfacing that’s failing and worn patches where water runs and sits, in cast iron baths, pressed steel baths and Victorian roll-tops.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Stanton (DE6)
- Region
- Derbyshire
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Why repair rather than replace?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Our bath re-enamelling starts from £350. We charge the same wherever you are, with no extra for Stanton. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why us?
- A year’s guarantee on all work
- Fixed prices from your pictures
- Dust sheets down, tidy finish
- Straight answers about what a repair can do
Read our full price list and resurfacing vs replacement cost guide.
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- Fix dripping taps quickly
- Use washing-up liquid and a soft cloth
- Leave the bath for the full curing time before using it
- Keep suction mats out of the bath
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
How it works
You don’t need to empty the room. We bring everything we need with us, put protection down and get going once we have agreed what we’re doing. It normally takes the best part of a day, and you are welcome to carry on with your day while we work.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the following day.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Tell us if there are stairs or a lift
- Clear toiletries, mats and anything else from around the area
Getting a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Related advice
Places near Stanton
What else we do in Stanton
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Common questions in Stanton
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Do you work for landlords and businesses?
Yes, often. We can quote for several properties together and work between tenancies.
How much does bath re-enamelling cost in Stanton?
Prices start from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your DE6 postcode.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before.
Do you charge for travel?
There’s no separate call-out charge. Your fixed quote includes everything.
Which areas do you work in?
We cover the whole UK, including Stanton and the rest of Derbyshire. Just include your postcode and we will offer you dates.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
Common problems we fix in Stanton
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
You may need us if you’ve spotted:
- Chips and rust in more than one place
- A peeling or bubbling previous coating
- A dull, rough surface that won’t come clean
- Worn patches where water runs and sits
Comparing quotes
- Whether a trained technician does the job
- How changes to the job are handled
- How soon you can use it again
- What preparation is included
What a repair can’t fix
We will not take on work that won’t last, so here’s what a repair cannot put right:
- Leaks from fittings rather than the bath
- A bath split right through the body
- Holes rusted through the metal
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
What bath re-enamelling costs
Resurfacing from £350. A fixed quote means you know the cost before booking. We look at:
- Unusual colours or finishes
- The material
- Access to the area
- Any earlier repairs that need removing first
Set against the cost of replacement, repairing usually costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
Good pictures mean an accurate price. Here’s what helps:
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
- A photo taken from further back
- Something in shot to show the size
Send us a photo of the damage and a wider shot of the entire item, with your DE6 postcode, and we will reply with a fixed price.
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
About our accreditations · Every repair comes with a one-year guarantee.
