Staffordshire · England
Bath re-enamelling & resurfacing in Stanton, Staffordshire
Bath re-enamelling for Stanton, without a refit. Send us photos for a fixed quote, then we come to you.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
Bath re-enamelling in Stanton, done in place
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. We work on cast iron baths, basins & shower trays and acrylic baths, and common reasons people contact us are staining under the taps and around the waste and a bath that stays dull however much you clean it.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Where
- Stanton (DE15)
- Area hub
- Staffordshire
- Cover
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
We turn up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes the best part of a day, and we leave the room as we found it.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Keep pets and children out of the room while we work
- Tell us about parking, stairs or access
- Have somewhere for us to park nearby if possible
How to get a price
If you’re in Stanton and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Advice
Keeping it looking good
To keep it looking its best:
- Wipe the bath dry after use in hard water areas
- Have chips seen to early
- Leave the bath for the full curing time before using it
- Never use suction bath mats
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We are used to working with agents and managing companies. Just send photos, the address and how to get access.
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Where we work around Stanton
Stanton is about 1 mile west of Swadlincote, in Staffordshire. Jobs in Stanton are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. We cover 512 places in Staffordshire. Our jobs stretch from Stanton to Birmingham (about 24 miles away).
Every address in DE15 is covered, from the main roads to the quietest streets. That includes homes on Rockingham Way, Hallfields Road and Park Road and the roads around them. If you’re just outside Stanton, we cover Newhall (1 mile north-east), Castle Gresley (1 mile south-east), Swadlincote (1 mile east), High Cross Bank (2 miles south-east) and Stanhope Bretby (2 miles north-east). Further out, we also cover Burton upon Trent (3 miles north-west), Tamworth (11 miles south), Lichfield (12 miles south-west), Rugeley (14 miles west), Burntwood (15 miles south-west) and Uttoxeter (14 miles north-west).
Local landmarks in Stanton
Typical jobs here are in homes near Stanton Primary School, The Gate Inn and Blessed Robert Sutton Catholic Voluntary Academy and the streets around them. For rail, the closest station is Burton-On-Trent station, about 2.9 miles north-west. Well-known places in the area include Burton upon Trent Infirmary (2.5 miles north-west) and Bretby Castle (2.5 miles north-east).
Honest limits
Some jobs aren’t right for a repair, including:
- Acrylic that moves when you stand in it
- A bath split right through the body
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we will give you a straight answer before booking.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
FAQs for Stanton
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
Will there be fumes?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Do you cover the whole of Staffordshire?
We work UK-wide. Prices do not change with location.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
What happens once I’ve sent photos?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
Someone resurfaced my bath and it’s peeling. Can you help?
Normally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Should you replace it?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and typically a day. Prices start from £350. The price reflects the work involved, not your postcode. You will see the full price before booking.
Why Stanton customers choose us
- CHAS and Constructionline accredited
- One price list for the whole UK
- Nothing taken out or refitted
- We come to you, anywhere in the UK
See our pricing and guide to resurfacing and replacement costs.
Prices and what affects them
Resurfacing from £350. Prices are worked out job by job, from your pictures. What matters most is:
- Whether old repairs or coatings need taking off
- The colour and finish to match
- Access to the area
- How much damage there is
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Send photos for a quote
We price nearly every job from pictures. This is what we need:
- Any earlier repairs or coatings
- One sharp close-up of the damage
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
The quickest way to a price is to send two or three photos through our quote form or call us. We will tell you honestly whether it can be repaired.
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Nearby places to Stanton
More services for Stanton
About our accreditations · Every repair comes with a one-year guarantee.
