Staffordshire · England
Bath Re-enamelling for Statfold homes
Bath re-enamelling in and around Statfold: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Worn patches where water runs and sits
Bath re-enamelling at your home in Statfold
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s several chips and rust patches and enamel that’s lost its shine and feels rough, we can generally put it right.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Statfold (B79)
- Area hub
- Staffordshire
- Warranty
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- Avoid suction-cup mats
- Get any chip repaired quickly
- Rinse off hair dye, oils and bath bombs straight away
- Store bottles off the bath
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
Where we work around Statfold
Statfold is about 3 miles north-east of Tamworth, in Staffordshire. Jobs in Statfold are booked in like any other job: a fixed price from your photos, then a visit to do the work. Our technicians cover 512 places in Staffordshire. Our nearest city page is Birmingham, about 17 miles away.
Every address in B79 is within our area, from the main roads to the quietest streets. If you’re just outside Statfold, we cover Seckington (2 miles east), Shuttington (2 miles south-east), Amington (2 miles south), Wigginton (2 miles west) and Haselour (2 miles north-west). We also work in nearby towns such as Burton upon Trent (10 miles north), Tamworth (3 miles south-west), Cannock (15 miles west), Lichfield (8 miles west), Rugeley (14 miles north-west) and Burntwood (12 miles west).
Landmarks near Statfold
Our customers here include homes close to Landau Forte Academy and Church of All Saints. The closest station to Statfold is Tamworth station, about 2.3 miles south-west of the centre. A little further out are Sir Robert Peel Community Hospital (4.2 miles south-west) and National Fairground Museum (within half a mile south).
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Nearby places to Statfold
Also in Statfold
Repair or replace: which is better?
If the bath is sound, re-enamelling is typically much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Statfold
- One-year guarantee on every repair
- Everything repaired in place
- We come to you, anywhere in the UK
- Colours mixed by hand to suit your surface
See our full price list and guide to resurfacing and replacement costs.
How we price bath re-enamelling
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- How many items we do on one visit
- Unusual colours or finishes
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
Compared with replacing, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- A coin beside the damage so we can judge size
- Where you are, by postcode
- Natural light rather than flash
- A wider photo showing the entire bath
If you’re in Statfold and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Statfold: your questions answered
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We will confirm timings when we quote.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we have finished.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Is a repair better than a new one?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
How the visit works
Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes the best part of a day, and we finish by cleaning up and talking you through the result.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Open a window if you can
- Tell us about parking, stairs or access
- Move bottles, mats and clutter away from the area
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.
Advice
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
DIY kit or professional repair?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Signs you need bath re-enamelling in Statfold
Many baths we resurface have simply been well used. Underneath, a cast iron or steel bath is normally as strong as ever.
The most common problems we are called about are:
- Worn patches where water runs and sits
- A roll-top that is seen better days
- Stains that will not shift
- A dull, rough surface that will not come clean
Questions to ask before you book
- How long it needs to cure
- A fixed quote, and whether VAT is included
- Whether cleaning and preparation are in the price
- How long the guarantee is and what it covers
About our accreditations · Every repair comes with a one-year guarantee.
