Bradford · England

Bath Re-enamelling for Steeton homes

Bath re-enamelling for Steeton, without a refit. Send us pictures for a fixed quote, then book a visit.

  • Resurfacing from £350
  • A peeling or bubbling previous coating
  • A bath in a colour that no longer suits
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Steeton

About our bath re-enamelling in Steeton

The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the next day. Typical jobs include a period or roll-top bath worth keeping and a coloured bath you want in white, on acrylic baths, basins & shower trays and pressed steel baths.

The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.

Where
Steeton (BD20)
County
Bradford
Guarantee
A year, on every repair
Quotes
From £350. Free and fixed, from your photos
Call
0345 017 0787
Updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Repairing versus replacing in Steeton

Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. In most other cases, resurfacing is the better choice. Prices start from £350. Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why book with us

  • Every repair guaranteed for a year
  • We’ll tell you if it’s not worth repairing
  • One price list for the entire UK
  • No need to remove anything

See our full price list or resurfacing vs replacement cost guide.

What affects the price in Steeton

Prices start from £350. There is no area surcharge for Steeton. The price reflects:

  • Whether old repairs or coatings need taking off
  • Doing more than one item at once
  • What the surface is made of
  • The size and number of damaged areas

We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Getting a price from photos

It only takes a minute to photograph the damage. Please include:

  • A photo taken from further back
  • Daylight if possible, and no flash reflection
  • A coin or ruler next to the damage for scale
  • What it’s made of, if you know

Most clients in Steeton get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

Steeton and nearby

Steeton is about 3 miles north-west of Keighley, in Bradford. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Steeton is one of 140 places in Bradford where we work. You can also see our page for Leeds, about 18 miles away.

We cover every part of the BD20 postcode area. Streets in the area include High Street, Station Road and Forge View, all of which we cover. We also cover the places around Steeton: Whitley Head (1 mile south), Eastburn (1 mile west), Sutton-in-Craven (2 miles west), Utley (2 miles south-east) and Braithwaite (2 miles south). Larger places within reach include Bradford (10 miles south-east), Keighley (3 miles south-east), Bingley (6 miles south-east), Shipley (9 miles south-east), Baildon (8 miles south-east) and Great Horton (10 miles south-east).

Near you in Steeton

Typical jobs here are in homes near St Stephen's Church, Steeton Primary School and South Craven School and the streets around them. Steeton has its own railway station: Steeton & Silsden station. Other landmarks nearby include Airedale General Hospital (less than half a mile west) and Keighley Private Classic Car Museum (1.2 miles north-west). Not far away are Redcar Tarn.

Map of Steeton © OpenStreetMap contributors

What a repair cannot fix

To be straight with you, there are a few things a repair will not fix:

  • Steel that has corroded right through
  • A cast iron or steel bath that is cracked right through
  • Damage hidden under a previous coating, until it’s stripped back

Not sure? Send pictures and we will give you a straight answer before you book.

What we work on

  • Victorian roll-tops
  • Pressed steel baths
  • Acrylic baths
  • Cast iron baths
  • Basins & shower trays

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.

Landlord and trade work in Steeton

For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.

If you manage property in Steeton, we can repair and quote for several addresses together. Send photos for each one and we will price them together.

What we do, step by step

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Plan for a full day. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. First we protect the bathroom and set up ventilation.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. The surface is prepared and a bonding primer applied.
  4. We spray on the new enamel finish in several coats.
  5. The bath is left to cure and can generally be used the day after.

How to prepare

  • Have somewhere for us to park nearby if possible
  • Ensure the room can be ventilated
  • Let the surface dry out before the visit

Ask for a price

Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed price back. Quotes are free and no obligation.

Get a free quote

Advice

Do you need bath re-enamelling in Steeton?

Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.

Common reasons people in Steeton contact us are:

  • A peeling or bubbling previous coating
  • A dull, rough surface that won’t come clean
  • Staining under the taps and around the waste
  • Worn patches where water runs and sits

Questions to ask before booking

  • When it can be used again
  • Whether the price covers travel
  • Whether the price is fixed and includes VAT
  • How the colour is matched

10 questions to ask before booking

Questions from Steeton

How do I book?

Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.

How much does bath re-enamelling cost in Steeton?

Resurfacing from £350. Every job gets a fixed quote from your photos. Send a close-up and a photo of the entire item with your BD20 postcode.

How long does re-enamelling last?

It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.

Can tenants book a repair?

Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.

Is there a smell?

Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.

Is my repair covered?

All our work carries a one-year guarantee. Ask us what it covers when you get your quote.

Will there be a smell?

There can be some smell while we work, which is why we ventilate. It clears as the materials cure.

Is it OK to have pets in the house?

Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.

How to look after the repair

Looking after the surface is easy:

  • Fix dripping taps quickly
  • A quick wipe after use keeps limescale away
  • Stick to gentle, non-abrasive cleaners
  • Avoid suction-cup mats

Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.

The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.