Derbyshire · England
Bath re-enamelling & resurfacing in Stenson, Derbyshire
Full bath re-enamelling and resurfacing in Stenson, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Wear marks under the taps
- A roll-top that’s seen better days
How we handle bath re-enamelling in Stenson
We don’t move the bath, so the taps, tiles and plumbing are not touched. It typically takes one visit, with the bath ready to use the following day. We’re frequently asked to fix lots of chips and rust spots and an original cast iron bath that needs restoring, across basins & shower trays, Victorian roll-tops and acrylic baths.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Area
- Stenson (DE73)
- Region
- Derbyshire
- Cover
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How to care for the repair
It’s all simple stuff:
- Get any chip repaired quickly
- Repair dripping taps early
- A quick wipe after use keeps limescale away
- Do not leave bottles, razors or sponges standing on the surface
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Landlord and trade work in Stenson
We work for landlords, letting agents and housing providers in Stenson as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
The process
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, put protection down and start once you are happy with the plan. Most jobs take the best part of a day, and you can get on with other things while we’re there.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
Getting ready for the visit
- Ensure the area is dry
- Have a window or extractor fan available
- Tell us if there are stairs or a lift
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Read more
Where we work around Stenson
Stenson is about 4 miles south-west of Derby, in Derbyshire. From the centre of Stenson to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Stenson is one of 532 towns and villages in Derbyshire we cover. Our nearest city page is Birmingham, about 32 miles away.
Jobs in DE73 are booked in the same way as anywhere else. We also cover the places around Stenson: Twyford (1 mile south), Findern (1 mile west), Willington (2 miles south-west), Foremark (2 miles south) and Milton (2 miles south). Further out, we also cover Swadlincote (7 miles south), Ilkeston (11 miles north-east), Long Eaton (10 miles east), Belper (11 miles north), Heanor (12 miles north-east) and Ripley (13 miles north).
Near you in Stenson
Locally, our jobs take us to homes close to Stenson Fields Primary Community School, Church of St Andrew and The Bubble Inn and the streets around them. The nearest railway station is Willington station, about 2.2 miles south-west. Further afield, we also cover the area around Bretby Castle (4.7 miles south-west) and Pastures Hospital (2.6 miles north-west).
Signs you need bath re-enamelling in Stenson
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
People generally call us when they notice one of these:
- A bath that stays dull however much you clean it
- Stains that won’t shift
- An original cast iron bath that needs restoring
- Chips and rust in more than one place
What to look for in a quote
- What happens if the damage is worse than the photos show
- Whether the price is fixed and includes VAT
- The length of the guarantee and what it covers
- When it can be used again
Other services in Stenson
FAQs for Stenson
Can you quote from pictures?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
When can you do it?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Is repairing better than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
What do you need from me?
Photos of the damage, a picture of the whole bath and your postcode. Then we will agree a date.
How long is the bath unusable?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Do you cover Stenson?
Yes. We work across the UK and travel to Stenson and the rest of Derbyshire. Send us photos for a fixed quote, or call 0345 017 0787.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before.
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Honest limits
To be straight with you, there are a few things a repair will not fix:
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
- A metal bath with a through crack
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Why repair rather than replace?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Prices start from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- One price list for the whole UK
- No need to remove anything
- Colour mixed on the day to match
- Straight answers about what a repair can do
Read our prices page and bath cost comparison.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
About our accreditations · Every repair comes with a one-year guarantee.
