Edinburgh · Scotland

Bath re-enamelling & resurfacing in Stockbridge, Edinburgh

Full bath re-enamelling and resurfacing in Stockbridge, carried out at your home and guaranteed for a year.

  • Resurfacing from £350
  • Chips and rust in more than one place
  • A period or roll-top bath worth keeping
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Stockbridge

Repair or replace: which is better?

Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why Stockbridge clients choose us

  • Most jobs done in one visit
  • Technicians who travel to you, UK-wide
  • Accredited with CHAS, Constructionline and SafeContractor
  • No need to remove anything

Read our full price list or bath cost comparison.

Bath re-enamelling at your home in Stockbridge

Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We’re often asked to fix lots of chips and rust spots and an outdated colour you’d like to change, across basins & shower trays, cast iron baths and Victorian roll-tops.

All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.

Stained basin resurfaced to clean white (before and after)
Area
Stockbridge (EH3, EH4, EH2)
County
Edinburgh
Warranty
12 months on all our work
Price
From £350. Free and fixed, from your photos
Telephone
0345 017 0787
Last updated
23 October 2026

Where we work around Stockbridge

Stockbridge is about 1 mile north of Edinburgh, in Edinburgh. Jobs in Stockbridge are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Stockbridge is one of 175 towns and villages in Edinburgh we cover.

Jobs in EH3, EH4 and EH2 work the same way as everywhere else we cover. Jobs here include addresses on Canon Lane, Circus Lane and Fettes Avenue and the roads around them. We also travel to Silvermills (1 mile east), Comely Bank (1 mile west), Dean Village (1 mile south-west), Inverleith (1 mile north) and Warriston (1 mile north-east). Within a short drive, we also cover Queensferry (7 miles west), South Portobello (4 miles east), Southhouse (5 miles south-east), Gilmerton (5 miles south-east), Gracemount (4 miles south-east) and Greendykes (4 miles south-east).

Landmarks near Stockbridge

Typical jobs here are in homes near Broughton High School, Stewart's Melville College and Stockbridge Church and the streets around them. Other local landmarks include London Street Primary School (0.9 miles east), Hamilton's Bar & Kitchen (within half a mile south-east), St Cuthbert's Church (0.7 miles south) and Stockbridge public library (less than half a mile east). For rail, the closest station is Edinburgh Waverley station, roughly 0.9 miles south-east of the centre. Further afield, we also cover the area around Palestine Museum (0.5 miles east) and Waverley Mall (0.8 miles south-east). The countryside around Stockbridge includes The New Leaf Co-op and Salisbury Crags.

  • Parks and local facilities nearby include King George V Park (0.5 miles east)
Map of Stockbridge © OpenStreetMap contributors

What we’re called out for in Stockbridge

Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.

It’s worth getting a quote if you see:

  • An original cast iron bath that needs restoring
  • Lots of chips and rust spots
  • Wear marks under the taps
  • A peeling or bubbling previous coating

Comparing quotes

  • A fixed quote, and whether VAT is included
  • When it can be used again
  • How your room will be protected
  • What preparation is included

10 questions to ask before booking

What happens on the day

We work cleanly and quietly, so you can carry on at home. We protect the area first, then the job itself takes the best part of a day. Before we leave, we explain the curing time and the aftercare.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures.

How to prepare

  • Let us know which floor the room is on
  • Make sure the area is dry
  • Move bottles, mats and clutter away from the area

Get a quote

Most customers in Stockbridge get their price from pictures. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

Get a fixed quote

Related advice

What bath re-enamelling costs

Resurfacing from £350. We price every job individually. What matters most is:

  • The material and finish
  • How much damage there is
  • What kind of damage it is
  • How many items we do on one visit

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Quotes from your photos

A couple of clear pictures is all it takes. Try to include:

  • A coin beside the damage so we can judge size
  • Your postcode, so we can check dates
  • The material, if you know it
  • Good light, ideally daylight, without flash glare

Email us pictures of the damage and one of the entire item, with your EH3 postcode, and we will reply with a fixed price.

Aftercare tips

To keep it looking its best:

  • Use washing-up liquid and a soft cloth
  • Fix dripping taps quickly
  • Do not use the bath until it has fully cured
  • Store bottles off the bath

Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.

Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.

What a repair cannot fix

Some problems need a builder, plumber or fitter rather than us:

  • Holes rusted through the metal
  • Damage hidden under a previous coating, until it’s stripped back
  • Leaking taps or wastes (a plumber’s job)

If in doubt, send pictures and we will say what we think.

Materials we repair

  • Cast iron baths
  • Basins & shower trays
  • Acrylic baths
  • Pressed steel baths
  • Victorian roll-tops

Stockbridge: your questions answered

Does re-enamelling smell?

Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.

Is the work guaranteed?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Does the bath have to be removed?

No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.

Do I need to be at home?

Someone needs to let us in and show us the job. You do not need to watch us work.

Can I add another job to the visit?

Of course, and it normally saves money. Send pictures of everything together and we will quote them together.

Will there be a smell?

There can be some smell while we work, so we ventilate the room. It clears as the materials cure.

How much does bath re-enamelling cost in Stockbridge?

Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.

Landlord and trade work in Stockbridge

Landlords, letting agents and housing providers in Stockbridge use us as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.

DIY repairs versus a professional job

If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.