Edinburgh · Scotland
Bath re-enamelling & resurfacing in Queensferry, Edinburgh
We travel to Queensferry for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A coating lifting around the plughole
- Wear marks under the taps
When we’d advise against a repair
Before you book, it’s worth knowing the limits:
- Plumbing leaks, which need a plumber
- A bath split right through the body
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
About our bath re-enamelling in Queensferry
Resurfacing renews the entire surface of the bath without a refit. It’s the answer when the entire bath is tired rather than one spot. Typical jobs include a dull, rough surface that won’t come clean and wear marks under the taps, on cast iron baths, Victorian roll-tops and acrylic baths.
A one-year guarantee comes as standard, so you are covered after the visit.
- Where
- Queensferry (EH30, EH29)
- County
- Edinburgh
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Do you need bath re-enamelling in Queensferry?
Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is generally perfectly sound.
It’s worth getting a quote if you see:
- Enamel that’s lost its shine and feels rough
- Chips and rust in more than one place
- Thin, worn enamel in places
- A coating lifting around the plughole
What to look for in a quote
- How the colour is matched
- If travel is included in the price
- A fixed quote, and whether VAT is included
- When it can be used again
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Never use suction bath mats
- A quick wipe after use keeps limescale away
- Rinse off hair dye, oils and bath bombs straight away
- Keep toiletries on a shelf rather than in the bath
Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Why repair rather than replace?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing renews the entire surface without moving it. Prices start from £350. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why Queensferry clients choose us
- No need to remove anything
- Repair technicians who travel to you, UK-wide
- Colour-matched on site
- We leave the room as we found it
Read our pricing and bath cost comparison.
The process
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. It generally takes a full day, and you can get on with other things while we’re there.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Let us know which floor the room is on
- Point us to the nearest place to park
- Move bottles, mats and clutter away from the area
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Read more
Prices and what affects them
Prices start from £350. You will know the full cost before booking. We take into account:
- What kind of damage it is
- How many areas need work
- Previous DIY repairs that have to come out
- Access to the area
Set against the cost of replacement, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
How to get a fixed quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- A photo taken from further back
- Something in shot to show the size
- Natural light rather than flash
- The material, if you know it
To get a price, send two or three pictures through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Queensferry and nearby
Queensferry is about 6 miles south of Dunfermline, in Edinburgh. Our repair technicians come to homes and businesses in Queensferry and nearby villages, so nothing has to leave your home. We cover 175 places in Edinburgh. Our nearest city page is Edinburgh, about 8 miles away.
Jobs in EH30 and EH29 are booked in the same way as anywhere else. From High Street, Station Road and Borrowman Square or a nearby road, a technician can come to you. Being close to the A904 and B800, Queensferry is easy for our technicians to reach. If you are just outside Queensferry, we cover Dalmeny (1 mile east), Lennie (3 miles south-east), Ingliston (3 miles south), Ratho Station (3 miles south) and Cammo (4 miles south-east). Further out, we also cover Edinburgh (8 miles east), Leith (9 miles east), Bonnington (8 miles east), Greenside (8 miles east), Broughton (8 miles east) and Bellevue (8 miles east).
Landmarks near Queensferry
Our customers here include homes close to Queensferry High School and Queensferry Parish Church, among other places. Queensferry’s nearest station is Dalmeny station, roughly 0.6 miles east of the centre. Nearby you will also find Inch Garvie (1.1 miles north) and Queensferry Museum (within half a mile north). For a walk, there’s Dundas Loch.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Also near Queensferry
Also in Queensferry
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
For anyone letting property in or around Queensferry, we’ll quote for several properties at once. Just send photos for each address and we’ll price them together.
Your questions about bath re-enamelling in Queensferry
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we’ll do the rest.
What if the damage is worse than the pictures show?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
How do I get a price for bath re-enamelling in Queensferry?
Resurfacing from £350. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
What happens after I send pictures?
You get a fixed price and available dates. If we need another angle, we will ask.
Can you price it without visiting?
Normally, yes. Clear pictures let us give you a fixed price without visiting.
Does re-enamelling smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
About our accreditations · Every repair comes with a one-year guarantee.
