Oxfordshire · England
Bath re-enamelling & resurfacing in Stoke Lyne, Oxfordshire
Bath re-enamelling across Stoke Lyne and nearby, normally in one visit and guaranteed for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- An original cast iron bath that needs restoring
Landlords, agents and businesses in Stoke Lyne
We work for landlords, letting agents and housing providers in Stoke Lyne as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Bath re-enamelling in Stoke Lyne, done in place
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Typical jobs include chips and rust in more than one place and an old resurfacing that’s failing, across cast iron baths, acrylic baths and pressed steel baths.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will come back.
- Area
- Stoke Lyne (OX27)
- Region
- Oxfordshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Stoke Lyne
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Look out for any of the following:
- Worn patches where water runs and sits
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
Comparing quotes
- What happens if they find more damage
- Who turns up on the day
- Whether the price is fixed and includes VAT
- What aftercare is recommended
Covering Stoke Lyne
Stoke Lyne is about 3 miles north of Bicester, in Oxfordshire. Our repair technicians come to homes and businesses in Stoke Lyne, so you don’t need to take anything anywhere. Our technicians cover all 443 towns and villages in Oxfordshire, from the larger towns to small villages. Our jobs stretch from Stoke Lyne to Birmingham (about 47 miles away).
Postcode districts we cover here: OX27. Nearby, we also work in Hardwick (1 mile north-east), Bucknell (2 miles south), Hethe (2 miles north-east), Cottisford (2 miles north-east) and Fringford (2 miles east). Further out, we also cover Oxford (14 miles south), Banbury (11 miles north-west), Bicester (3 miles south), Kidlington (10 miles south-west), Headington Quarry (13 miles south) and Bure Park (3 miles south).
What’s near Stoke Lyne
Around Stoke Lyne, we work in homes near Church of St Peter and Peyton Arms. For rail, the closest station is Bicester North station, about 3.4 miles south. Further afield, we also cover the area around Bicester Community Hospital (3.8 miles south) and Ardley Castle (1.8 miles west). Open spaces near Stoke Lyne include Graven Hill.
The process
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a full day. We tidy up before we leave and let you know when you can use it again.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
How to prepare
- Ensure the area is dry
- Mention any earlier repairs or resurfacing
- Point us to the nearest place to park
Ask for a price
To get a price, send two or three photos through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Advice
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Questions from Stoke Lyne
Can you do the outside of a roll-top?
Yes. Inside and out if you’d like.
How long is the bath unusable?
One day for most baths, ready the following day. We give you timings with the quote.
What do you need from me?
Photos of the damage, a picture of the whole bath and your postcode. Then we’ll agree a date.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Which areas do you work in?
The whole UK, including all of Oxfordshire. Just include your postcode and we will confirm dates.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Places near Stoke Lyne
What else we do in Stoke Lyne
Why repair rather than replace?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing usually wins. Our bath re-enamelling starts from £350. A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
What you get with us
- Generally one visit, start to finish
- Work done at your home or business
- No need to remove anything
- CHAS, Constructionline and SafeContractor accredited
Take a look at our full price list and bath cost comparison.
Looking after it afterwards
To keep it looking its best:
- Use washing-up liquid and a soft cloth
- A dripping tap should be fixed promptly
- Leave the bath for the full curing time before using it
- Keep suction mats out of the bath
Use mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
When a repair isn’t the answer
Not everything can be repaired, and we would rather say so up front. We cannot fix:
- A bath that is rusted through
- Problems we can’t see until an old finish comes off
- Leaks from fittings rather than the bath
Send us photos and we’ll tell you honestly.
Materials we repair
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Can I fix it myself?
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
About our accreditations · Every repair comes with a one-year guarantee.
