Herefordshire · England
Bath re-enamelling & resurfacing in Stoke Prior, Herefordshire
Our technicians come to Stoke Prior for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A coloured bath you want in white
- A period or roll-top bath worth keeping
Honest limits
We won’t take on work that will not last, so here’s what a repair cannot put right:
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
How we handle bath re-enamelling in Stoke Prior
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We regularly repair acrylic baths, Victorian roll-tops and cast iron baths, and common reasons people contact us are a dull, rough surface that won’t come clean and brown or grey marks that don’t clean off.
You get a one-year guarantee, the same in Stoke Prior as everywhere else we work.
- Location
- Stoke Prior (HR6)
- County
- Herefordshire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in Stoke Prior
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Keep toiletries on a shelf rather than in the bath
- A dripping tap should be fixed promptly
- Don’t let dyes or oils sit on the finish
- Don’t leave a chip unrepaired
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
More services for Stoke Prior
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
What we’re called out for in Stoke Prior
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
People typically call us after spotting something like this:
- A coloured bath you want in white
- Lots of chips and rust spots
- Wear marks under the taps
- An original cast iron bath that needs restoring
What your quote should include
- Whether they match the colour on site
- How long it needs to cure
- How long the guarantee is and what it covers
- Whether a trained technician does the job
How the visit works
We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and we start. It normally takes most of the day, and we will tell you if anything changes.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Make sure the room can be ventilated
- Mention any earlier repairs or resurfacing
Ask for a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Related advice
FAQs for Stoke Prior
Do you come to Stoke Prior?
We do. We send a technician to Stoke Prior for every job, with no extra charge for travel.
What areas do you cover?
We cover the entire UK, including Stoke Prior and the rest of Herefordshire. Just include your postcode and we’ll confirm dates.
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
Do you charge for travel?
We do not add a call-out fee. The fixed quote covers the visit and the work.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
How we price bath re-enamelling
Prices start from £350. You’ll know the full cost before booking. We look at:
- Previous DIY repairs that have to come out
- Unusual colours or finishes
- The size and number of damaged areas
- Access to the area
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Quotes from your pictures
You can usually get a fixed quote without us visiting. To make it quick:
- Any earlier repairs or coatings
- Your postcode, so we can check dates
- A close-up of the damage, in focus
- What it’s made of, if you know
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and no obligation.
Stoke Prior and the surrounding area
Stoke Prior is about 10 miles north of Hereford, in Herefordshire. We travel to clients in Stoke Prior and nearby villages, so you do not need to take anything anywhere. Stoke Prior is one of 255 towns and villages in Herefordshire where we work. You can also see our page for Birmingham, about 39 miles away.
Our visits in HR6 work the same way as everywhere else we cover. From Norman's Lane, Eastmead and Stoke Prior Road or a nearby road, a technician can come to you. If you’re just outside Stoke Prior, we cover Eaton (1 mile north-west), Leominster (2 miles north-west), Newtown (3 miles west), Ivington (3 miles west) and Stockton (3 miles north). Larger places within reach include Hereford (10 miles south), Redhill (11 miles south), Newton Farm (11 miles south), Whitecross (10 miles south), Eign Hill (10 miles south) and Widemarsh (10 miles south).
What’s near Stoke Prior
Around Stoke Prior, we work in homes near Church of St Luke, Earl Mortimer College and Stoke Prior Primary School and the streets around them. The nearest railway station is Leominster station, about 2 miles north-west. A little further out are Comfort Castle (2.3 miles north-west) and Leominster (2.1 miles north-west). Not far away are Dinmore Hill.
About our accreditations · Every repair comes with a one-year guarantee.
