Hull · England
Bath Re-enamelling in Sutton Ings
Full bath re-enamelling and resurfacing for homes and businesses in Sutton Ings and across Hull. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A coloured bath you want in white
- Wear marks under the taps
Where we work around Sutton Ings
Sutton Ings is about 2 miles north-east of Kingston upon Hull, in Hull. Book a date that suits you, and you’ll know when to expect us, so there’s no waiting around. Sutton Ings is one of 22 towns and villages in Hull where we work. You can also see our page for Leeds, about 51 miles away.
Our repair technicians cover all of the HU7 and HU8 postcode area and the streets around it. That includes homes on The Avenue, Howdale Road and Foxholme Road. If you are just outside Sutton Ings, we cover Sutton-on-Hull (1 mile south-east), Bransholme (1 mile west), Stoneferry (1 mile south-west), Summergangs (2 miles south) and Wilmington (2 miles south-west). Larger places within reach include Drypool (3 miles south), Gipsyville (5 miles south-west), East Ella (5 miles south-west), Inglemire (3 miles west), Anlaby Park (5 miles south-west) and The Avenues (3 miles south-west).
Local landmarks in Sutton Ings
Around Sutton Ings, we work in homes near Winifred Holtby Academy, East Park and The Ship Inn, among other places. Also close by are Church of St James and Boundary Wall (under half a mile south-east), Wilberforce College (1.3 miles south-east) and Dorchester Primary School (under half a mile west). The closest station to Sutton Ings is Hull station, roughly 3.1 miles south-west of the centre. Well-known places in the area include St Stephen's (3 miles south-west) and Baynard Castle (4.7 miles west).
Bath re-enamelling at your home in Sutton Ings
We don’t move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. We regularly repair cast iron baths, basins & shower trays and pressed steel baths, and the jobs we see most are an old resurfacing that’s failing and a period or roll-top bath worth keeping.
A one-year guarantee comes as standard, so you are covered after the visit.
- Where
- Sutton Ings (HU7, HU8)
- Area hub
- Hull
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. We do not charge extra for travel to Sutton Ings. The price comes down to:
- How hard the colour is to match
- The material
- The type of damage
- The size and number of damaged areas
What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so you know the cost before booking.
How to get a fixed quote
Two or three clear photos are typically enough. Try to include:
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
- One picture of the whole bath
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Work for landlords and builders
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We carry out planned and one-off repairs for housing associations and facilities teams in Hull and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Nearby places to Sutton Ings
Also in Sutton Ings
Repair or replace in Sutton Ings?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day, with the bath back in use the following day. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why us?
- A fixed quote before booking
- Everything repaired in place
- Straight answers about what a repair can do
- Colours mixed by hand to suit your surface
Read our full price list and resurfacing vs replacement cost guide.
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Use washing-up liquid and a soft cloth
- Rinse off hair dye, oils and bath bombs straight away
- Never use suction bath mats
- Do not use the bath until it has fully cured
A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
How the visit works
There is not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. The job generally runs to a full day.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Tell us about parking, stairs or access
- Clear toiletries, mats and anything else from around the area
- Mention any earlier repairs or resurfacing
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Advice
Repairs by material
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Honest limits
Not everything can be repaired, and we will tell you before we start. Repairs will not solve:
- A bath split right through the body
- Leaking taps or wastes (a plumber’s job)
- Problems we cannot see until an old finish comes off
If in doubt, send pictures and we’ll say what we think.
What we work on
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
Sutton Ings: your questions answered
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you quote from photos?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
What happens after I send pictures?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
How long will the bath be out of use?
Generally one day, with the bath ready the next day. Deeply pitted baths may need a second day.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we’ll quote them together.
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
About our accreditations · Every repair comes with a one-year guarantee.
