Hull · England
Bath Re-enamelling in Anlaby Park
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Anlaby Park. Free, fixed quotes from your photos.
- Resurfacing from £350
- Worn patches where water runs and sits
- A period or roll-top bath worth keeping
How we handle bath re-enamelling in Anlaby Park
Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Whether it’s a period or roll-top bath worth keeping and a coating lifting around the plughole, we can usually put it right, whatever the material.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Location
- Anlaby Park (HU4, HU5, HU10)
- Region
- Hull
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Do you need bath re-enamelling in Anlaby Park?
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
It’s worth getting a quote if you see:
- An outdated colour you’d like to change
- Thin, worn enamel in places
- Chips and rust in more than one place
- An original cast iron bath that needs restoring
Before booking anyone
- What the guarantee covers, and for how long
- How to care for the finish
- How long it needs to cure
- Whether the price is fixed and includes VAT
Towns and villages near Anlaby Park
Also in Anlaby Park
What a repair cannot fix
We won’t take on work that will not last, so these are the limits:
- Damage hidden under a previous coating, until it’s stripped back
- A metal bath with a through crack
- Plumbing leaks, which need a plumber
If in doubt, send pictures and we’ll say what we think before you book.
Surfaces we repair
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
The process
Visits start with a quick look at the job together, so there are no surprises. Next, we cover and mask everything nearby and we start. Allow the best part of a day, and we’ll tell you if anything changes.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Keep pets and children out of the room while we work
- Mention if the room is upstairs or in a flat
Getting a price
The quickest way to a price is to send a couple of pictures using our quote form or call us. We will say straight away if a repair is the right fix.
Advice
What bath re-enamelling costs
Resurfacing from £350. We do not charge extra for travel to Anlaby Park. The price depends on:
- Whether old repairs or coatings need taking off
- Doing more than one item at once
- Access to the area
- What kind of damage it is
A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from photos
Phone photos are fine. Just make sure we can see:
- Any details about the material
- One picture of the whole bath
- Natural light rather than flash
- Any earlier repairs or coatings
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
About Anlaby Park
Anlaby Park is about 3 miles south-west of Kingston upon Hull, in Hull. Anywhere in HU4, a technician comes to you. Anlaby Park is one of 22 places in Hull we cover. You can also see our page for Leeds, about 47 miles away.
Postcode districts we cover here: HU4, HU5 and HU10. Whether you live on Hull Road, Elgar Road and Orchard Road or anywhere nearby, a technician can come to you. You will find Anlaby Park on the A1105, which makes it straightforward to reach. We also travel to East Ella (1 mile north-east), Anlaby Common (1 mile north), Anlaby (1 mile west), Willerby (2 miles north-west) and Hessle (2 miles south-west). We also work in nearby towns such as Kingston upon Hull (3 miles north-east), Sutton-on-Hull (5 miles north-east), Kingswood (5 miles north-east), Sutton Ings (5 miles north-east), Drypool (3 miles east) and Stepney (3 miles north-east).
Landmarks near Anlaby Park
Locally, our jobs take us to homes close to Rokeby Park Primary School, The Educational Hearing Service for Hearing and Vision and St. Mark. Also close by are The Highway pub (0.9 miles north), Pickering Park (0.7 miles south-east) and Sirius Academy West (less than half a mile south). The closest station to Anlaby Park is Hessle station, about 2.1 miles south-west. A little further out are Southeast Asia Museum at the University of Hull (2.8 miles north-east) and St Stephen's (2.7 miles east). Open spaces near Anlaby Park include Far Ings National Nature Reserve.
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- Leave the bath for the full curing time before using it
- Clean with a soft cloth and mild detergent
- Wipe the bath dry after use in hard water areas
- Get any chip repaired quickly
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
Anlaby Park questions
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Do you cover Anlaby Park?
Yes, we do. Repair technicians travel to Anlaby Park from across the region, with no extra charge for travel.
Is the work guaranteed?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Are there extra charges for Anlaby Park?
No. Our quotes include travel, with the same prices everywhere we work.
Is repairing better than replacing?
Typically, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
How much does bath re-enamelling cost in Anlaby Park?
Resurfacing from £350. Every job gets a fixed price from your pictures. Send a close-up and a photo of the whole item with your HU4 postcode.
How long does re-enamelling last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
About our accreditations · Every repair comes with a one-year guarantee.
