Sandwell · England
Bath re-enamelling & resurfacing in Swan Village, Sandwell
Bath re-enamelling in Swan Village without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- A roll-top that’s seen better days
- An outdated colour you’d like to change

Bath re-enamelling in Swan Village without replacing anything
Most baths are re-enamelled in a day, and you can use the bath the following day. Nothing is disconnected or removed. We regularly repair acrylic baths, cast iron baths and basins & shower trays, and common reasons people contact us are a bath in a colour that no longer suits and a coating lifting around the plughole.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Where
- Swan Village (B70, B71, DY4)
- Area hub
- Sandwell
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026

Keeping it looking good
Simple care helps the repair last. Our advice:
- Wash away dyes and oils after use
- Store bottles off the bath
- Wipe the bath dry after use in hard water areas
- Never use suction bath mats
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
The process
Arrival times are agreed in advance, so you are not left guessing. Once we’re there, the work takes a full day in most cases. The room is left tidy.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the following day.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Avoid using the area for a few hours before we arrive
- Keep pets and children out of the room while we work
How to get a price
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Advice
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Repairing versus replacing in Swan Village
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
What you get with us
- Most jobs done in one visit
- Straight answers about what a repair can do
- Dust sheets down, tidy finish
- Nothing taken out or refitted
Take a look at our full price list or bath cost comparison.
Nearby places to Swan Village
What else we do in Swan Village
When we’d advise against a repair
We’d rather lose a job than do one that will not last, so these are the limits:
- Problems we can’t see until an old finish comes off
- Holes rusted through the metal
- A bath split right through the body
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we repair
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Swan Village: your questions answered
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room masked and ventilated.
How durable is a resurfaced bath?
Look after it and it lasts. Gentle cleaning, no suction mats.
Is repairing better than replacing?
Typically, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can you repair something that’s been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
Where we work around Swan Village
Swan Village is about 1 mile south-west of West Bromwich, in Sandwell. Whether you are in the middle of Swan Village or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover all 33 towns and villages across Sandwell, from the larger towns to small villages. You can also see our page for Birmingham, about 7 miles away.
Every address in B70, B71 and DY4 is within our area. Whether you live on New Road, Dial Lane and Mani Lane or anywhere nearby, a technician can come to you. We also cover the places around Swan Village: Greets Green (1 mile south-west), Great Bridge (1 mile west), Galton Village (1 mile west), Horseley Heath (1 mile west) and Lyng (1 mile south-east). We also work in nearby towns such as Oldbury (3 miles south), Smethwick (3 miles south-east), Rowley Regis (3 miles south-west), Darlaston (3 miles north), Reddal Hill (4 miles south-west) and Cradley Heath (5 miles south-west).
Local landmarks in Swan Village
Typical jobs here are in homes near George Salter Academy, Health Futures UTC and Church of St. Andrew. Also close by are Dartmouth Park (1.6 miles east) and Ryders Green Primary School (under half a mile south-east). The closest station to Swan Village is Sandwell & Dudley station, roughly 1.3 miles south of the centre. Other landmarks nearby include Dudley Castle (2.8 miles west) and Royal Brierley Crystal Museum (2.4 miles west). Open spaces near Swan Village include Forge Mill Lake and Portway Hill.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Signs you need bath re-enamelling in Swan Village
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
These are the problems we’re asked about most:
- A coating lifting around the plughole
- A dull, rough surface that will not come clean
- Brown or grey marks that do not clean off
- An outdated colour you’d like to change
Questions to ask before you book
- What preparation is included
- Whether the price covers travel
- How soon you can use it again
- How changes to the job are handled
About our accreditations · Every repair comes with a one-year guarantee.

