Kent · England
Bath Re-enamelling for Swanscombe homes
Full bath re-enamelling and resurfacing at your home in Swanscombe, with a one-year guarantee on every repair.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- Lots of chips and rust spots
About our bath re-enamelling in Swanscombe
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. If you’re dealing with thin, worn enamel in places and a coloured bath you want in white, we can typically put it right, whatever the material.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Swanscombe (DA9, DA10)
- Region
- Kent
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Nearby places to Swanscombe
What else we do in Swanscombe
Work for landlords and builders
We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll arrange it.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
What happens on the day
We agree an arrival time beforehand. On site, it takes a full day for most jobs. The room is left tidy and ready to use once it has cured.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
Preparing for the visit
- Tell us about parking, stairs or access
- Keep a parking space free if you can
- Have a window or extractor fan available
Get a quote
To get a price, send a couple of pictures through our quote form or call us. We will say straight away whether it can be repaired.
Related advice
When we’d advise against a repair
In fairness, some problems need a different fix:
- A metal bath with a through crack
- Leaks from fittings rather than the bath
- Acrylic that moves when you stand in it
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
Repairs by material
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Swanscombe: your questions answered
Can landlords book you?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Do you cover the entire of Kent?
The entire UK, including all of Kent. Send your postcode with your photos and we will confirm dates.
Can a failed resurfacing be redone?
Typically, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
How long will the bath be out of use?
Normally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.
Is my repair covered?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
What happens if you find more damage?
The price is fixed for what the pictures show. If there is more, we will tell you before starting.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.
How we price bath re-enamelling
Prices start from £350. Prices are worked out job by job, from your pictures. The main factors are:
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- How easy the damage is to reach
The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
How to get a fixed quote
Two or three clear photos are usually enough. Try to include:
- A coin or ruler next to the damage for scale
- Natural light rather than flash
- The material, if you know it
- A close-up of the damage, in focus
Most clients in Swanscombe get their price from photos. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Signs you need bath re-enamelling in Swanscombe
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Get in touch if you’ve noticed:
- An old resurfacing that’s failing
- Enamel that is lost its shine and feels rough
- Staining under the taps and around the waste
- Worn patches where water runs and sits
Questions to ask before booking
- How changes to the job are handled
- If travel is included in the price
- How the room is protected while they work
- Whether a trained technician does the job
Swanscombe and the surrounding area
Swanscombe is about 3 miles east of Dartford, in Kent. Our technicians come to homes and businesses in Swanscombe, so you don’t need to take anything anywhere. Swanscombe is one of 922 towns and villages in Kent where we work. Our jobs stretch from Swanscombe to London (about 17 miles away).
Jobs in DA9 and DA10 are booked in the same way as anywhere else. We regularly work on streets such as London Road, Craylands Square and High Street and the roads around them. With the A206 and A226 close by, Swanscombe is simple for us to get to. We also cover the places around Swanscombe: Greenhithe (1 mile north-west), Stone (1 mile west), Bean (1 mile south), West Thurrock (2 miles north) and Darenth (2 miles south-west). Further out, we also cover Dartford (3 miles west), Sevenoaks (12 miles south), Gravesend (4 miles east), Northfleet (3 miles south-east), Swanley (6 miles south-west) and Kings Hill (13 miles south).
Landmarks near Swanscombe
Our clients here include homes close to Church of St Mary, Knockhall Primary School and Castle Hill Park and the streets around them. Nearby too are The Ebbsfleet Academy (1 mile south-east) and The Pier Hotel (0.5 miles north-west). For rail, the closest station is Greenhithe for Bluewater station, about 0.5 miles west. Further afield, we also cover the area around Stone Castle (0.7 miles south-west) and Bluewater (1 mile south-west). Not far away are Sawyers Lake and Chafford Gorges Nature Park.
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why choose Surface Doctor in Swanscombe
- Generally one visit, start to finish
- We’ll tell you if it’s not worth repairing
- Work done at your home or business
- No extra charge for your area
Read our pricing and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
