South Lanarkshire · Scotland
Bath re-enamelling & resurfacing in Tannochside, South Lanarkshire
We travel to Tannochside for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- Wear marks under the taps
How we handle bath re-enamelling in Tannochside
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Whether it’s a peeling or bubbling previous coating and a roll-top that’s seen better days, we can usually put it right.
Every job is backed for twelve months. We return to put right any problem with the work.
- Where
- Tannochside (G71)
- Region
- South Lanarkshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How to look after the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Wash away dyes and oils after use
- Never use suction bath mats
- Dry the bath after use to stop limescale
- Stick to gentle, non-abrasive cleaners
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
What we are called out for in Tannochside
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Keep an eye out for these signs:
- Thin, worn enamel in places
- Stains that won’t shift
- A coloured bath you want in white
- Several chips and rust patches
Comparing quotes
- What prep work is covered
- Who turns up on the day
- When it can be used again
- What the guarantee covers, and for how long
About Tannochside
Tannochside is about 1 mile north of Uddingston, in South Lanarkshire. Our technicians come to homes and businesses in Tannochside and the surrounding area, so there is no workshop to go to. We work in 139 places in South Lanarkshire. We work right across the region, from Tannochside to Glasgow (about 8 miles away).
Here we cover the G71 postcode area. Streets in the area include Lomond Road, Myrtle Road and Kilmuir Road, all of which we cover. With the A752 close by, Tannochside is simple for us to get to. Other places close to Tannochside include Uddingston (1 mile south), Birkenshaw (1 mile west), Viewpark (1 mile east), Old Monkland (2 miles north-east) and Bargeddie (2 miles north). Further out, we also cover East Kilbride (7 miles south-west), Hamilton (4 miles south), Cambuslang (3 miles west), Blantyre (3 miles south), Larkhall (8 miles south-east) and Carluke (12 miles south-east).
Around Tannochside
Locally, our jobs take us to homes close to Uddingston, The Rowan Tree Inn and Uddingston Grammar School. The nearest railway station is Uddingston station, about 0.8 miles south-west. Further afield, we also cover the area around Glasgow Fort (3.7 miles north-west) and Kirklands Hospital (1.4 miles south). For a walk, there is Strathclyde Loch.
What we do, step by step
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes a full day. We tidy up before we leave and let you know when you can use it again.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Point us to the nearest place to park
- Tell us if there are stairs or a lift
- Keep children and pets away from the room on the day
How to get a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Advice
Nearby places to Tannochside
Other services in Tannochside
Tannochside questions
How long does re-enamelling take?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
Do you work for landlords and businesses?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Can you do more than one item on the same visit?
Of course, and it normally saves money. Just add the extra items to your photos and you will get one combined price.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you redo someone else’s repair?
Generally, yes. We remove the old repair before doing a new one, so mention it when you send photos.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
What a repair cannot fix
Some jobs aren’t right for a repair, including:
- A poorly supported acrylic bath, until it’s firmed up
- A bath that is rusted through
- Plumbing leaks, which need a plumber
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
Repair or replace: which is better?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why us?
- One visit for most repairs
- Accredited with CHAS, Constructionline and SafeContractor
- One price list for the entire UK
- Everything repaired in place
See our prices page and guide to resurfacing and replacement costs.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
