Glasgow · Scotland
Bath Re-enamelling for Bargeddie homes
Our repair technicians come to Bargeddie for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- A dull, rough surface that won’t come clean
The process
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which generally takes a full day. If we find something your photos didn’t show, we will explain it before carrying on.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Clear the area around the damage
- Open a window if you can
- Plan for the room to be out of bounds to pets and children
Getting a price
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Read more
Bath re-enamelling in Bargeddie, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We work on Victorian roll-tops, acrylic baths and pressed steel baths, and the jobs we see most are a bath in a colour that no longer suits and a period or roll-top bath worth keeping.
All our work comes with a one-year guarantee, wherever you are in Glasgow.
- Where
- Bargeddie (G69, ML5)
- County
- Glasgow
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
About Bargeddie
Bargeddie is about 2 miles west of Coatbridge, in Glasgow. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in all 183 towns and villages in Glasgow. We work right across the region, from Bargeddie to Glasgow (about 8 miles away).
Every address in G69 and ML5 is within our area, from the main roads to the quietest streets. From Countess Way, Park Road and Coatbridge Road or a nearby road, we can come to you. We also travel to Old Monkland (1 mile east), Birkenshaw (1 mile south), Tannochside (2 miles south), Coatbridge (2 miles east) and Viewpark (2 miles south-east). Further out, we also cover Glasgow (8 miles west), Hillhead (8 miles west), Dowanhill (9 miles west), Woodlands (8 miles west), Woodside (8 miles west) and North Kelvinside (8 miles west).
Local landmarks in Bargeddie
Around Bargeddie, we work in homes near Drumpark School, Bargeddie Parish Church and Buchanan High School and the streets around them. Bargeddie has its own railway station: Bargeddie station. Well-known places in the area include Summerlee Museum of Scottish Industrial Life (1.9 miles north-east) and Glasgow Fort (2.6 miles north-west). Open spaces near Bargeddie include Hogganfield Loch.
Why repair rather than replace?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Set against the cost of replacement, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why Bargeddie customers choose us
- We’ll tell you if it’s not worth repairing
- We come to you, anywhere in the UK
- Same prices wherever you are
- A fixed quote before booking
See our full price list and guide to resurfacing and replacement costs.
When to call us in Bargeddie
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
These are the problems we are asked about most:
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
- Thin, worn enamel in places
- Staining under the taps and around the waste
What to look for in a quote
- What preparation is included
- Whether the price covers travel
- Who will actually do the work
- Whether they match the colour on site
Landlords, agents and businesses in Bargeddie
For anyone letting property in or around Bargeddie, we’ll quote for several properties at once. Send pictures for each one and we’ll price them together.
Landlords, letting agents and housing providers in Bargeddie use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Aftercare tips
So the finish stays in good condition for years:
- Don’t leave a chip unrepaired
- Respect the curing time we give you
- Avoid suction-cup mats
- Stick to gentle, non-abrasive cleaners
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
How we price bath re-enamelling
Resurfacing from £350. We price every job individually. What matters most is:
- The material
- The size and number of damaged areas
- The type of damage
- Access to the area
A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Send photos for a quote
When you take your photos, a few simple things make all the difference:
- Something in shot to show the size
- Your postcode, so we can check dates
- Details of any past repairs
- One picture of the whole bath
Send us pictures of the damage and a wider shot of the entire item, and tell us you’re in Bargeddie, and we will come back with a fixed quote.
Questions from Bargeddie
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
Will there be a smell?
Some materials have a smell while they’re applied. It fades as everything cures.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Nearby places to Bargeddie
Also in Bargeddie
About our accreditations · Every repair comes with a one-year guarantee.
