Cheshire West and Chester · England
Bath Re-enamelling for Tarvin homes
We travel to Tarvin for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Wear marks under the taps
Repair or replace: which is better?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. Otherwise, resurfacing normally wins. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
What you get with us
- Normally one visit, start to finish
- One-year guarantee on every repair
- A fixed quote before you book
- We leave the room as we found it
See our prices page or guide to resurfacing and replacement costs.
Bath re-enamelling in Tarvin, done in place
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Whether it’s brown or grey marks that don’t clean off and a period or roll-top bath worth keeping, we can help, on Victorian roll-tops, basins & shower trays and cast iron baths alike.
We stand behind the work with a one-year guarantee.
- Area
- Tarvin (CH3)
- Area hub
- Cheshire West and Chester
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Tarvin
Prices start from £350. A fixed quote means you know the cost before you book. We look at:
- Access to the area
- The colour and finish to match
- The size and number of damaged areas
- Any earlier repairs that need removing first
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from pictures
A couple of clear pictures is all it takes. Try to include:
- One picture of the entire bath
- A coin beside the damage so we can judge size
- Any details about the material
- A clear, close picture of the problem area
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price without visiting.
When we would advise against a repair
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- A bath that is rusted through
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
If in doubt, send photos and we will say what we think.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
Tarvin and the surrounding area
Tarvin is about 5 miles east of Chester, in Cheshire West and Chester. Whether you are in the middle of Tarvin or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Our repair technicians cover 224 places across Cheshire West and Chester, from the larger towns to small villages. We work right across the region, from Tarvin to Liverpool (about 16 miles away).
Our visits in CH3 work the same way as everywhere else we cover. Whether you live on High Street, Gowy Crescent and Hockenhull Avenue or anywhere nearby, we can come to you. Close by, we cover Oscroft (1 mile north-east), Duddon Heath (1 mile south-east), Greenlooms (2 miles south-west), Duddon (2 miles south-east) and Duddon Common (2 miles east). Further out, we also cover Chester (5 miles west), Ellesmere Port (8 miles north-west), Winsford (10 miles east), Northwich (11 miles north-east), Neston (14 miles north-west) and Boughton (5 miles west).
Around Tarvin
Locally, our jobs take us to homes close to Red Lion pub, St Andrew's Church and Tarvin Primary School. The closest station to Tarvin is Mouldsworth station, about 2.9 miles north-east. A little further out are Mouldsworth Motor Museum (3 miles north) and Horton-cum-Peel (2 miles north). Not far away are Hockenhull Platts.
Landlord and trade work in Tarvin
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
We work for landlords, letting agents and housing providers in Tarvin as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
What we do, step by step
We work cleanly and quietly. Protection goes down first, then the job itself takes a full day. At the end we talk you through the curing time and the aftercare.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
How to prepare
- Let the surface dry out before the visit
- Tell us about any previous repairs or coatings
- Let us know which floor the room is on
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Related advice
Towns and villages near Tarvin
What else we do in Tarvin
When to call us in Tarvin
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Send us a photo if you notice any of these:
- A period or roll-top bath worth keeping
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
- A coating lifting around the plughole
What your quote should include
- The length of the guarantee and what it covers
- How long it needs to cure
- Who turns up on the day
- What happens if they find more damage
Questions from Tarvin
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Is the work guaranteed?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Which areas do you work in?
The entire UK, including all of Cheshire West and Chester. Send your postcode with your pictures and we’ll offer you dates.
How much does bath re-enamelling cost in Tarvin?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
Do you work in Tarvin?
We do. We send a technician to Tarvin for every job, with no extra charge for travel.
Are there extra charges for Tarvin?
No. Our quotes include travel, and we charge the same wherever you are.
Is there any odour?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Use washing-up liquid and a soft cloth
- Wipe the bath dry after use in hard water areas
- Have chips seen to early
- Fix dripping taps quickly
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
About our accreditations · Every repair comes with a one-year guarantee.
