Somerset · England
Bath Re-enamelling for Thorncombe homes
Bath re-enamelling for Thorncombe, without a refit. Get a fixed quote from your photos, then book a visit.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Stains that won’t shift
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
Bath re-enamelling in Thorncombe, done in place
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We work on Victorian roll-tops, cast iron baths and pressed steel baths, and people most often call us about lots of chips and rust spots and a coloured bath you want in white.
You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Location
- Thorncombe (TA20)
- Region
- Somerset
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Thorncombe questions
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
How soon can you come?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
How long does re-enamelling take?
Normally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Can you quote from pictures?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Will there be a smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Wipe the bath dry after use in hard water areas
- Leave the bath for the full curing time before using it
- Clean with a soft cloth and mild detergent
- Store bottles off the bath
A quick rinse and wipe after use helps, particularly where water is hard, so limescale can’t build up.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Honest limits
We would rather lose a job than do one that will not last, so these are the limits:
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
Send us pictures and we will tell you honestly.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
Repair or replace in Thorncombe?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why Thorncombe customers choose us
- Colour-matched on site
- Technicians who travel to you, UK-wide
- A year’s guarantee on all work
- Same prices wherever you are
Take a look at our full price list and resurfacing vs replacement cost guide.
Other services in Thorncombe
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
For landlords and businesses
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
What we’re called out for in Thorncombe
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Common reasons people in Thorncombe contact us include:
- Wear marks under the taps
- A coloured bath you want in white
- A dull, rough surface that won’t come clean
- A period or roll-top bath worth keeping
Comparing quotes
- A fixed price, and whether VAT is included
- When it can be used again
- What the guarantee covers, and for how long
- Aftercare advice
Thorncombe and nearby
Thorncombe is about 5 miles south-east of Chard, in Somerset. We travel to clients in Thorncombe and nearby villages, so there is no workshop to go to. Thorncombe is one of 640 towns and villages in Somerset we cover.
Here we cover the TA20 postcode area. From High Street, Chard Street and Fore Street or a nearby road, a technician can come to you. We also travel to Blackdown (1 mile east), Winsham (2 miles north), Greenham (2 miles north-east), Netherhay (3 miles north-east) and Drimpton (3 miles north-east). We also work in nearby towns such as Yeovil (14 miles north-east), Chard (5 miles north-west), Crewkerne (6 miles north-east), Ilminster (7 miles north), Preston Plucknett (13 miles north-east) and Martock (11 miles north-east).
Local landmarks in Thorncombe
In Thorncombe, that means homes near Parish Church of St Mary. A little further out are Chard Community Hospital (4.4 miles north-west) and Marshwood Castle (3.9 miles south-east). For a walk, there is Payne's Down.
What happens on the day
We agree an arrival time beforehand, so you know when to expect us. On site, it takes the best part of a day for most jobs. We leave the room clean and you’ll know when it can be used.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Clear toiletries, mats and anything else from around the area
- Keep children and pets away from the room on the day
Getting a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
