Pembrokeshire · Wales
Bath re-enamelling & resurfacing in Thornton, Pembrokeshire
Full bath re-enamelling and resurfacing for homes and businesses in Thornton and across Pembrokeshire. Send photos for a free, fixed quote.
- Resurfacing from £350
- Thin, worn enamel in places
- Staining under the taps and around the waste

Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Bath re-enamelling at your home in Thornton
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Common call-outs are for a dull, rough surface that won’t come clean and lots of chips and rust spots, in cast iron baths, Victorian roll-tops and acrylic baths.
All of our repairs are guaranteed for twelve months in Thornton and everywhere else. We return to put right any problem with the work.

- Location
- Thornton (SA73)
- Region
- Pembrokeshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Thornton
More services for Thornton
What affects the price in Thornton
Resurfacing from £350. We price every job individually. What matters most is:
- Whether we combine several jobs
- Any earlier repairs that need removing first
- How many areas need work
- What the surface is made of
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
It only takes a minute to photograph the damage. Please include:
- A photo taken from further back
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- Any earlier repairs or coatings
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and you’re under no obligation.
Thornton and nearby
Thornton is about 1 mile north of Milford Haven, in Pembrokeshire. We visit customers in Thornton, so nothing has to leave your home. Thornton is one of 223 places in Pembrokeshire where we work.
All of SA73 is within our area, from the main roads to the quietest streets. We also travel to Priory (1 mile south), Liddeston (1 mile south-west), Steynton (1 mile east), Haven's Head (1 mile south) and Milford Haven (1 mile south). We also work in nearby towns such as Haverfordwest (6 miles north-east), Pembroke (7 miles south-east), Pembroke Dock (5 miles south-east), The Marsh (6 miles north-east), Dinbych-y-Pysgod (15 miles east) and The Green (15 miles east).
Local landmarks in Thornton
Typical jobs here are in homes near St Francis V.R.C. School, Church Of St Peter & St Cewydd and The Priory Inn and the streets around them. Thornton’s nearest station is Milford Haven station, roughly 1 mile south. Other landmarks nearby include South Pembrokeshire Hospital (4.4 miles south-east) and Castle Pill (1.4 miles south-east). For a walk, there’s Hubberstown Pill and Boltonhill.
Repairing versus replacing in Thornton
If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- One visit for most repairs
- CHAS, Constructionline and SafeContractor accredited
- Technicians who travel to you, UK-wide
- One-year guarantee on every repair
See our full price list or resurfacing vs replacement cost guide.
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which usually takes a full day. If we find something your photos didn’t show, we will explain it before carrying on.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Tell us if there are stairs or a lift
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
Getting a price
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Read more
Do you need bath re-enamelling in Thornton?
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Send us a photo if you notice any of these:
- Chips and rust in more than one place
- An original cast iron bath that needs restoring
- A dull, rough surface that won’t come clean
- Worn patches where water runs and sits
Before you book anyone
- Whether the price covers travel
- What happens if the damage is worse than the photos show
- What preparation is included
- Whether a trained technician does the job
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
How to look after the repair
Looking after the surface is easy, and it makes a real difference:
- Wash away dyes and oils after use
- Use washing-up liquid and a soft cloth
- Avoid suction-cup mats
- Store bottles off the bath
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Don’t try to scrub a worn bath back to shine. It removes more of the surface.
Common questions in Thornton
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Can I get a quote without a visit?
Nearly always. If pictures don’t show enough, we’ll ask for another angle.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
Are there extra charges for Thornton?
There’s no separate call-out charge. Your fixed quote includes everything.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Landlord and trade work in Thornton
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
About our accreditations · Every repair comes with a one-year guarantee.

