Rutland · England
Bath Re-enamelling for Thorpe by Water homes
Full bath re-enamelling and resurfacing in Thorpe by Water, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Several chips and rust patches
- Stains that won’t shift
Bath re-enamelling at your home in Thorpe by Water
The bath stays where it is, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, and can be used again the day after. Our repair technicians work on basins & shower trays, pressed steel baths and acrylic baths, and the jobs we see most are an old resurfacing that’s failing and several chips and rust patches.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Thorpe by Water (LE15)
- Area hub
- Rutland
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Signs you need bath re-enamelling in Thorpe by Water
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
You may need us if you’ve spotted:
- A roll-top that’s seen better days
- Worn patches where water runs and sits
- A dull, rough surface that will not come clean
- Several chips and rust patches
What to look for in a quote
- Whether the price is fixed and includes VAT
- What happens if they find more damage
- How long the guarantee is and what it covers
- Who turns up on the day
How we price bath re-enamelling
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- Doing more than one item at once
- Unusual colours or finishes
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Quotes from your photos
Most quotes are done from photos alone. To help us price it:
- Whether it’s been repaired or coated before
- What it’s made of, if you know
- Where you are, by postcode
- One sharp close-up of the damage
Most clients in Thorpe by Water get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
What happens on the day
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes most of the day, depending on what we find, and we finish by cleaning up and talking you through the result.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Have somewhere for us to park nearby if possible
- Let the surface dry out before the visit
- Mention any earlier repairs or resurfacing
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Advice
Work for landlords and builders
We work for landlords, letting agents and housing providers in Thorpe by Water as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Thorpe by Water questions
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders in Thorpe by Water.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
How much does bath re-enamelling cost in Thorpe by Water?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
What happens once I’ve sent pictures?
We come back with a fixed price. There’s no obligation to book.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
How long does re-enamelling take?
One day for most baths, ready the next day. We give you timings with the quote.
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Can you price it without visiting?
Nearly always. If pictures don’t show enough, we will ask for another angle.
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- Stick to gentle, non-abrasive cleaners
- A quick wipe after use keeps limescale away
- Leave the bath for the full curing time before using it
- Keep toiletries on a shelf rather than in the bath
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Thorpe by Water and nearby
Thorpe by Water is about 5 miles north of Corby, in Rutland. Our repair technicians come to homes and businesses in Thorpe by Water, so nothing has to leave your home. We cover all 47 towns and villages in Rutland, from the larger towns to small villages. Our jobs stretch from Thorpe by Water to Birmingham (51 miles away).
Jobs in LE15 work the same way as everywhere else we cover. You will find streets such as Main Street and Green Lane. We also travel to Seaton (1 mile north-east), Stoke Dry (1 mile north), Gretton (1 mile south), Harringworth (2 miles east) and Bisbrooke (2 miles north). We also work in nearby towns such as Oakham (8 miles north), Uppingham (3 miles north-west), Barleythorpe (9 miles north), Cottesmore (11 miles north), Langham (10 miles north) and North Luffenham (5 miles north-east).
Landmarks near Thorpe by Water
Around Thorpe by Water, we work in homes near Uppingham Community College and Church of St Andrew. For rail, the closest station is Corby station, roughly 4.8 miles south of the centre. Nearby you’ll also find Rockingham Castle (3.6 miles south-west). The countryside around Thorpe by Water includes King's Hill and Great Merrible Wood.
More services for Thorpe by Water
When a repair is not the answer
It helps to know what we can’t do:
- Anything hidden under an old coating, until we remove it
- A poorly supported acrylic bath, until it’s firmed up
- Plumbing leaks, which need a plumber
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
