County Durham · England
Bath Re-enamelling in Thorpe Larches
Bath re-enamelling in Thorpe Larches without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Enamel that’s lost its shine and feels rough
About our bath re-enamelling in Thorpe Larches
Most baths are re-enamelled in a day, with the bath ready to use the following day. Nothing is disconnected or removed. Whether it’s chips and rust in more than one place and brown or grey marks that don’t clean off, we can generally put it right, on cast iron baths, pressed steel baths and basins & shower trays alike.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Location
- Thorpe Larches (TS21)
- Area hub
- County Durham
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
A repair isn’t always the answer, and we will tell you before we start. We cannot fix:
- Steel that has corroded right through
- Problems we can’t see until an old finish comes off
- A bath split right through the body
Send us pictures and we’ll tell you honestly before you book.
What we work on
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
What happens on the day
We work cleanly and quietly, so you can stay at home while we’re there. We protect the area first, then the work takes most of the day. At the end we talk you through how soon it can be used and how to care for it.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the next day.
Before we arrive
- Let the surface dry out before the visit
- Ensure the room can be ventilated
- Plan for the room to be out of bounds to pets and children
Getting a price
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Related advice
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
Places near Thorpe Larches
What else we do in Thorpe Larches
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Where we work around Thorpe Larches
Thorpe Larches is about 5 miles north-west of Stockton-on-Tees, in County Durham. Across the TS21 area, we carry out the work at your property. Our technicians cover all 329 towns and villages across County Durham. Our jobs stretch from Thorpe Larches to Newcastle upon Tyne (27 miles away).
Here we cover the TS21 postcode area. Neighbouring places we cover include Thorpe Thewles (2 miles south-east), Stillington (2 miles south-west), Whitton (2 miles south), Wynyard (2 miles north-east) and Butterwick (2 miles north). Larger places within reach include Durham (13 miles north-west), Newton Aycliffe (7 miles west), Bishop Auckland (11 miles west), Spennymoor (10 miles north-west), Seaham (15 miles north) and Peterlee (9 miles north).
Around Thorpe Larches
A little further out are University Hospital of North Tees (3.7 miles south-east) and Sedgefield (2.7 miles north-west).
What we’re called out for in Thorpe Larches
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Contact us if you’ve noticed:
- A period or roll-top bath worth keeping
- A bath in a colour that no longer suits
- An old resurfacing that is failing
- A dull, rough surface that won’t come clean
Comparing quotes
- The length of the guarantee and what it covers
- What happens if the damage is worse than the photos show
- What aftercare is recommended
- A fixed price, and whether VAT is included
Thorpe Larches questions
Will there be fumes?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Can you re-enamel a roll-top bath?
Yes, often. We resurface the inside, and the outside can be refinished too.
Do the materials smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.
Can you price it without visiting?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What information do you need?
Send pictures through the quote form or call 0345 017 0787, and we will take it from there.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
How to care for the repair
Much of the damage we repair could have been avoided. A few tips:
- Avoid suction-cup mats
- Stick to gentle, non-abrasive cleaners
- Don’t leave bottles, razors or sponges standing on the surface
- Do not leave a chip unrepaired
A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
For landlords and businesses
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Repair or replace: which is better?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- Colour-matched on site
- Fixed prices from your pictures
- CHAS, Constructionline and SafeContractor accredited
- No need to remove anything
Read our full price list or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
