Surrey · England
Bath re-enamelling & resurfacing in Thorpe, Surrey
Our technicians come to Thorpe for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
Bath re-enamelling in Thorpe, done in place
We do not move the bath, so the taps, tiles and plumbing aren’t touched. It usually takes one visit, with the bath ready to use the following day. Whether it’s worn patches where water runs and sits and a coloured bath you want in white, we can help, whatever the material.
You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Thorpe (TW20)
- Area hub
- Surrey
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Thorpe
Thorpe is about 2 miles south-east of Egham, in Surrey. Our repair technicians come to homes and businesses in Thorpe, so you don’t need to take anything anywhere. Thorpe is one of 395 towns and villages in Surrey where we work. Our nearest city page is London, about 20 miles away.
Postcode districts we cover here: TW20. Jobs here include addresses on Village Road, Western Avenue and Midway Avenue and the roads around them. Being close to the B388, Thorpe is easy for our technicians to reach. If you are just outside Thorpe, we cover Thorpe Green (1 mile south-west), Stroude (1 mile west), Egham Hythe (1 mile north), Penton Hook (1 mile east) and Virginia Water (1 mile west). Within a short drive, we also cover Guildford (11 miles south), Woking (7 miles south), Camberley (10 miles south-west), Epsom (12 miles south-east), Ewell (13 miles east) and Walton-on-Thames (6 miles east).
Landmarks near Thorpe
In Thorpe, that means homes near Thorpe CofE Aided Primary School, The American School In England and Penton Park. Other local landmarks include The Red Lion pub (under half a mile south), The Magna Carta School (1.4 miles north) and Church of St Mary (under half a mile south-east). Thorpe’s nearest station is Virginia Water station, about 1.4 miles south-west of the centre. Other landmarks nearby include Spelthorne Museum (1.9 miles north-east) and Runnymede Hospital (2.2 miles south). Open spaces near Thorpe include Gracious Pond and Manor Lake.
The process
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We clean up when we are done and let you know when you can use it again.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Have somewhere for us to park nearby if possible
- Mention any earlier repairs or resurfacing
How to get a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Read more
For landlords and businesses
If you manage property in Thorpe, we’ll quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Repair or replace in Thorpe?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why Thorpe clients choose us
- Work done at your home or business
- A fixed quote before you book
- Colour-matched on site
- One price list for the whole UK
Take a look at our full price list and resurfacing vs replacement cost guide.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Nearby places to Thorpe
What else we do in Thorpe
When a repair isn’t the answer
A repair isn’t always the answer, and we would rather say so up front. Repairs will not solve:
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we work on in Thorpe
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
Prices and what affects them
Prices start from £350. A fixed quote means you know the cost before you book. We look at:
- How much damage there is
- How hard the colour is to match
- Doing more than one item at once
- The material
Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed price
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- Any earlier repairs or coatings
- Any details about the material
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Rinse off hair dye, oils and bath bombs straight away
- A quick wipe after use keeps limescale away
- Have chips seen to early
- Keep suction mats out of the bath
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Questions from Thorpe
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
Do you resurface freestanding baths?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Which areas do you work in?
Everywhere in the UK, Thorpe included. There’s no extra charge for travel.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Do you work for landlords and businesses?
Yes, often. We can quote for several properties together and work between tenancies.
About our accreditations · Every repair comes with a one-year guarantee.
